SD-1000L-48 - 1008W 19-72V Input 48V 21A Output DC-DC Converter
Home > Products > SD-1000L Series 1000W 48Vdc Input Single Output DC-DC Converter > 1008W 19-72V Input 48V 21A Output DC-DC Converter
|
DescriptionSD-1000 Series enclosed 1U DC-DC converter, for the growing demand of high wattage dc/dc applications. Features 4:1~2:1 wide DC input range and 2000VAC input/output isolation, with 19~72V input levels. Other standard features include 12V/0.25A auxiliary output, output OK signal, remote on/off control and remote sense functions as well as short circuit, over load, over voltage and over temperature protections.
Standards

|
|
Request a Quote
Add to ClipBook
|
|
General Specifications
| Input Voltage |
19 ~ 72Vdc |
| Input Current |
23.5A/48Vdc |
| Inrush Current |
--- |
| Set Up, Rise Time |
500ms, 50ms at full load |
| Ripple & Noise |
150mV |
| Output Voltage Tolerance |
±1.0% |
| Line Regulation |
±0.5% maximum |
| Load Regulation |
±0.5% maximum |
| Over Load Protection |
105%~125% rated output power |
|
Constant current limiting, unit will shut down o/p voltage about 5sec. Re-power on to recover |
| Over Voltage Protection |
Shut down o/p voltage, re-power on to recover |
| Over Temperature Protection |
80°C ±5°C (TSW2) Detect on heatsink of O/P diode; |
|
75°C ±5°C (TSW1) Detect on heatsink of power transistor |
|
Shut down o/p voltage, recovers automatically after temperature goes down |
| Remote On/Off Control |
Refer to datasheet |
| Output OK Signal |
Open collector signal low when PSU turns on, Max sink current: 10mA |
| Working Temperature |
-20°C to +60°C (refer to output derating curve), -40 start up possible |
| Working Humidity |
20 ~ 90% RH non-condensing |
| Storage Temperature, Humidity |
-40°C to +85°C, 10 ~ 95% RH |
| Temperature Coefficient |
±0.02%/°C (0 ~ 50°C) |
| Vibration |
10 ~ 500Hz, 2G 10min./1cycle, 60min. each along X, Y, Z axes |
| Withstand Voltage |
I/P-O/P: 2KV I/P-FG: 1.5KV O/P-FG: 0.5KVAC |
| Isolation Resistance |
I/P-O/P, I/P-FG, O/P-FG: 100M Ohms/500VDC |
| Safety Standards |
IEC60950-1 CB Approved by TUV |
| EMC Standards |
Compliance to EN55022 (CISPR22); EN61000-3-2,-3; EN61000-4-2,3,4,6,8; |
|
ENV50204 Light industry level, criteria A |
| MTBF |
32K hrs min. MIL-HDBK-217F (25°C) |
|
SD-1000L-48 Input & Output Data
|
I/P Voltage
|
Input Current
|
Eff.
|
O/P Voltage
|
Rated Current
|
Rated Pwr
|
Volt. Adj.
|
OVP
|
|
19~72Vdc
|
23.5A/48Vdc
|
90%
|
48Vdc
|
21A
|
1008W
|
46~56V
|
56.6~66.2V
|
|
(420KB)
|
| Add this product to your ClipBook
Request a quote for this product |