| Input Voltage |
90 ~ 264VAC 127 ~ 373VDC |
| Input Frequency |
47 ~ 63Hz |
| Power Factor |
PF>0.95/230VAC PF>0.98/115VAC at full load and rated output voltage |
|
PF>0.9 at 65 ~ 100% load |
| Input Current |
4A/ 115VAC 2A/ 230VAC |
| Inrush Current |
75A/230VAC, cold start |
| Leakage Current |
<0.75mA/ 240VAC |
| Set Up, Rise Time |
2500ms, 80ms at full load 230VAC /115VAC |
| Hold Up Time |
15ms at full load 230VAC /115VAC |
| Current Adj. Range |
Can be adjustedby internal potential meter or through output cable |
| Over Current Protection |
95 ~ 108% |
|
Constant current limiting, recovers automatically after fault condition is removed |
| Short Circuit Protection |
Hiccup mode, recovers automatically after fault condition is removed. |
| Over Voltage Protection |
Shut down and latch off o/p voltage, re-power on to recover |
| Over Temperature Protection |
105°C ±5°C (TSW1) |
|
Shut down o/p voltage, recovers automatically after temperature goes down |
| Working Temperature |
-30°C ~ +60°C @ full load; +70°C @ 60% load (Refer to derating curve) |
| Working Humidity |
20 ~ 95% RH non-condensing |
| Storage Temperature, Humidity |
-40°C ~ +80°C, 10 ~ 95% RH |
| Temp. Coefficient |
±0.03%/°C (0 ~ 50°C) |
| Vibration |
10 ~ 500Hz, 5G 12min./1cycle, period for 72min. each along X, Y, Z axes |
| Safety Standards |
UL1012 ; EN61347-1, EN61347-2-13 independent (except for HLG-240 C type) ; UL60950-1, TUV EN60950-1 |
| Withstand Voltage |
I/P-O/P:3.75KVAC I/P-FG:1.88KVAC O/P-FG:0.5KVAC |
| Isolation Resistance |
I/P-O/P, I/P-FG, O/P-FG:100M Ohms / 500VDC / 25°C/ 70% RH |
| EMC |
Compliance to EN55015, EN55022 (CISPR22) Class B; EN61000-3-2 Class C (>50% load); EN61000-3-3; |
|
EN61000-4-2,3,4,5,6,8,11; ENV50204, EN61547, EN55024, heavy industry level (surge 4KV), criteria A |
| MTBF |
207.9Khrs min. MIL-HDBK-217F (25°C) |
| Dimensions |
244.2 x 68 x 38.8mm (HLG-240-Blank/A/B) |
|
251 x 68 x 38.8mm (HLG-240-C) |
.jpg)
.jpg)
.jpg)
Download Range Datasheet 
