| Input Voltage |
90 ~ 264Vac |
| Input Frequency |
47 ~ 63Hz |
| Input Current |
0.55A/115Vac 0.35A/230Vac |
| Inrush Current |
35A/115Vac 70A/230Vac, cold start |
| Leakage Current |
0.25mA/ 240Vac |
| Voltage Tolerance |
±5.0% |
| Line Regulation |
±1.0% |
| Load Regulation |
±2.0% |
| Set Up, Rise Time |
500ms, 20ms / 230Vac 500ms, 20ms / 115Vac at full load |
| Hold Up Time |
50ms/230Vac 16ms/115Vac at full load |
| Over Current Protection |
110 ~ 150% rated output power |
|
Hiccup mode, recovers automatically after fault condition is removed |
| Over Voltage Protection |
Shut off o/p voltage, clamping by zener diode |
| Working Temperature |
-30°C ~ +70°C (Refer to output load derating curve) |
| Working Humidity |
20 ~ 90% RH non-condensing |
| Storage Temperature, Humidity |
-40°C ~ +80°C, 10 ~ 95% RH |
| Temperature Coefficient |
±0.03%/°C (0 ~ 50°C) |
| Vibration |
10 ~ 500Hz, 2G 10min./1cycle, period for 60min. each along X, Y, Z axes |
| Withstand Voltage |
I/P-O/P:3KVAC |
| Isolation Resistance |
I/P-O/P:>100M Ohms/500VDC 25°C 70% RH |
| Safety Standards |
UL879, UL1310 Class 2, CAN/CSA C22.2 No. 223-M91, IP67 approved |
|
Design refers toTUV EN60950-1, EN61347-2-13 |
| EMC |
Compliance to EN55022 (CISPR22) Class B; EN61000-3-2,-3; ENV50204; |
|
EN61000-4-2,3,4,5,6,8,11; EN55024, light industry level, criteria A |
| MTBF |
786.5Khrs min. MIL-HDBK-217F (25°C) |
| Dimensions |
118 x 35 x 26mm |
