General Specifications
| Input Voltage |
90 ~ 264Vac 135 ~ 370Vdc |
| Input Frequency |
47 ~ 63Hz |
| Input Current |
0.7A/100Vac 0.4A/230Vac |
| Inrush Current |
40A/100Vac 80A/230Vac, cold start |
| Leakage Current |
0.25mA/240Vac |
| Set Up, Rise, Hold Up Time |
4000ms, 100ms, 30ms / 230Vac 4000ms, 100ms, 10ms / 115Vac at full load |
| Over Load Protection |
110% ~ 200% rated output power |
|
Hiccup mode, recovers automatically after fault condition is removed |
| Over Voltage Protection |
115% ~ 135% |
|
Clamp by zener diode |
| Working Temperature |
-10°C ~ +50°C (Refer to output load derating curve) |
| Working Humidity |
20% ~ 90% RH non-condensing |
| Storage Temperature, Humidity |
-20°C ~ +85°C, 10 ~ 95% RH |
| Temperature Coefficient |
±0.03% /°C (0 ~ 50°C) |
| Vibration |
10 ~ 500Hz, 2G 10min./1cycle, period for 60min.each along X, Y, Z axes |
| Withstand Voltage |
I/P-O/P:4242VDC |
| Isolation Resistance |
I/P-O/P:100M Ohms / 500VDC / 25/°C 70% RH |
| Safety Standards |
UL60950-1, CSA C22.2, TUV EN60950 -1 approved |
| EMC |
Compliance to FCC part15/CISPR22 Class B, EN55022 Class B; EN61000-3-2,3; |
|
EN61000-4-2,3,4,5,6,8,11, light industry level, criteria A |
| MTBF |
100Khrs min. MIL-HDBK-217F(25°C) |
| DC Plug & Cable |
2.1 x 5.5 x 11mm turning fork type, center positive; AWM2468 18AWG 2C 1500 ±50mm |
|
