PS-25-12 - 25.2W 12V 2.1A Open Frame Switching Power Supply
Home > Products > Open Frame Switching Power Supply > PS-25 Series 25W Single Output Open Frame Switching PSU > 25.2W 12V 2.1A Open Frame Switching Power Supply
General Specifications
| Input Voltage |
85 ~ 264Vac 120 ~ 370Vdc |
| Input Frequency |
47 ~ 63Hz |
| Input Current |
0.6A/115Vac 0.4A/230Vac |
| Inrush Current |
36A, cold start |
| Leakage Current |
<0.5mA/240Vac |
| Set Up, Rise Time |
200ms, 20ms/230Vac 200ms, 30ms/115Vac at full load |
| Hold Up Time |
100ms/230Vac 20ms/115Vac at ful load |
| Over Load Protection |
Above 105% rated output power |
|
Hiccup mode, recovers automatically after fault condition is removed |
| Over Voltage Protection |
Shut off o/p voltage, clamping by zener diode |
| Over Temperature Protection |
Tj 135°C typically (U1) detect on main control IC |
|
Shut down o/p voltage, re-power on to recover |
| Working Temperature |
-10°C ~ +60°C (Refer to output load derating curve) |
| Working Humidity |
20 ~ 90% RH non-condensing |
| Storage Temperature, Humidity |
-20°C ~ +85°C, 10 ~ 95% RH |
| Temperature Coefficient |
±0.03/°C (0 ~ 50°C) |
| Vibration |
10 ~ 500Hz, 2G 10min./1 cycle, period for 60 min. each along X, Y, Z axes |
| Withstand Voltage |
I/P-O/P: 3KVAC I/P-FG: 1.5KVAC O/P-FG: 0.5KVAC |
| Isolation Resistance |
I/P-O/P, I/P-FG, O/P-FG: 100M Ohms/500VDC |
| Safety Standards |
UL60950-1, TUV EN60950-1 Approved |
| EMC |
Compliance to EN55022 (CISPR22) Class B, EN61000-3-2,-3; |
|
EN61000-4-2,3,4,5, light industry level, criteria A |
| MTBF |
576.4Khrs min. MIL-HDBK-217F (25°C) |
PS-25-12 Specifications
| Part Number |
Voltage (max/rated) | Current (amps) | Power (watts) | R&N (mV) | Efficiency (%) |
| PS-25-12
|
12V
|
2.1A
|
25.2W
|
100mV
|
78%
|