PB-300P-24 - 300W 24V 6.25A PFC Single Output Battery Charger
Home > Products > External Battery Charger > PB-300P Series 300W PFC Single Output Battery Charger > 300W 24V 6.25A PFC Single Output Battery Charger
General Specifications
| Input Voltage |
90 to 132VAC / 180 to 264VAC selected by switch |
| Input Frequency |
47 to 63Hz |
| Power Factor |
>0.65 typically at 230VAC |
| AC Current |
6A/115VAC 3A/230VAC |
| Inrush Current |
60A cold start |
| Leakage Current |
<3.5mA / 240VAC |
| Battery Type |
Open & Sealed Lead Acid |
| Over Load Protection |
90 to 110% rated output current |
|
Constant current limiting, recovers automatically after fault condition is removed |
| Reverse Polarity Portection |
By internal fuse |
| Over Temperature Protection |
Automatically derate charge current until zero |
| Working Temperature |
-10°C to +40°C (Refer to output load derating curve) |
| Working Humidity |
20% to 90% RH non-condensing |
| Storage Temperature, Humidity |
-40°C to +85°C, 10% to 95% RH |
| Temperature Coefficient |
±0.05%/°C (0°C to 45°C) |
| Vibration |
10 to 500Hz, 2G 10min./1cycle, 60min. each along X, Y, Z axes |
| Safety Standards |
EN60335-2-29 CB Approved by TUV |
| Withstand Voltage |
I/P-O/P:3KVAC I/P-FG:1.5KVAC O/P-FG:0.5KVAC |
| Isolation Resistance |
I/P-O/P, I/P-FG, O/P-FG:100M Ohms/500VDC |
| EMC |
Compliance to EN55022 (CISPR22) Class B, EN61000-3-2,-3 |
|
EN61000-4-2,3,4,5,6,8,11; ENV50204, EN55024, Light industry level, criteria A |
| MTBF |
115.8Khrs minimum. MIL-HDBK-217F (25°C) |
PB-300P-24 Specifications
| Part Number |
Current (amps) | Power (watts) | Efficiency (%) |
| PB-300P-24
|
10.5A
|
300W
|
86%
|