| Input Voltage |
85 ~ 264VAC 120 ~ 370VDC |
| Input Frequency |
47 ~ 63Hz |
| Power Factor |
PF>0.95/230VAC PF>0.99/115VAC at full load |
| Input Current |
5A/115VAC 2.5A/230VAC |
| Inrush Current |
35A/115VAC 70A/230VAC |
| Leakage Current |
<1.2mA/ 240VAC |
| Set Up, Rise Time |
1000ms, 50ms/230VAC 2500ms, 50ms/115VAC at full load |
| Hold Up Time |
16ms/230VAC 16ms/115VAC at full load |
| Over Load Protection |
105 ~ 135% rated output power |
|
Constant current limiting, recovers automatically after fault condition is removed |
| Over Voltage Protection |
Shut down o/p voltage, re-power on to recover |
| Over Temperature Protection |
90°C ±5°C (TSW1:detect on heatsink of power transistor) |
|
100°C ±5°C for 3.3V,5V,7.5V ; 95°C ±5°C for others (TSW2: detect on heatsink of power diode) |
|
Shut down o/p voltage, recovers automatically after temperature goes down |
| 5V Standby |
5VSB : 5V@0.3A ; tolerance ±5%, ripple : 50mVp-p (max.) |
| DC OK Signal |
PSU turn on : 3.3 ~ 5.6V ; PSU turn off : 0 ~ 1V |
| Remote Control |
RC+ / RC-: 4 ~ 10V or open = power on ; 0 ~ 0.8V or short = power off |
| Working Temperature |
-30°C ~ +70°C (Refer to output load derating curve) |
| Working Humidity |
20 ~ 90% RH non-condensing |
| Storage Temperature, Humidity |
-40°C ~ +85°C, 10 ~ 95% RH |
| Temperature Coefficient |
±0.03%/°C (0 ~ 50°C) |
| Vibration |
10 ~ 500Hz, 5G 10min./1cycle, 60min. each along X, Y, Z axes |
| Withstand Voltage |
I/P-O/P:3KVAC I/P-FG:1.5KVAC O/P-FG:0.5KVAC |
| Isolation Resistance |
I/P-O/P, I/P-FG, O/P-FG:100M Ohms / 500VDC / 25°C/ 70% RH |
| Safety Standards |
UL60950-1, TUV EN60950-1 approved |
| EMC |
Compliance to EN55022 (CISPR22) Class B, EN61000-3-2,-3, ENV50204, |
|
EN61000-4-2,3,4,5,6,8,11, EN55024, EN61000-6-2, heavy industry level, criteria A |
| MTBF |
176K hrs min. MIL-HDBK-217F (25°C) |
| Dimensions |
199 x 105 x 41mm |
.jpg)
.jpg)
.jpg)
.jpg)
Download Range Datasheet 