NID60S48-24 - 60W 24V 2.5A Non Isolated DC-DC Converter
Home > Products > DC-DC Converter > NID60 Series 20~ 6W DC-DC Single Output Converter > 60W 24V 2.5A Non Isolated DC-DC Converter
General Specifications
| Input Protection |
Fuse recommended (5A) |
| Input External Capacitance |
22uF / 100V low ESR |
| Line Regulation |
±0.5% |
| Load Regulation |
±0.5% |
| Voltage Accuracy |
±2.0% |
| Switching Frequency |
250KHz |
| Output External Capacitance |
100uF / 25V low ESR |
| Over Load Protection |
120 ~ 220% rated output power |
|
Hiccup mode, recovers automatically after fault condition is removed |
| Short Circuit Protection |
All output equipped with short circuit |
|
Hiccup mode, recovers automatically after fault condition is removed |
| Over Voltage Protection |
Shut off o/p voltage, clamp by TVS diode |
| Working Temperature |
-25°C ~ +65°C (Refer to output load derating curve) |
| Working Humidity |
20% ~ 85% RH non-condensing |
| Storage Temperature, Humidity |
-25°C ~ +105°C, 10 ~ 85% RH |
| Temperature Coefficient |
±0.03% /°C (0 ~ 50°C) |
| Vibration |
10 ~ 500Hz, 2G 10min./1 cycle, period for 60min. each along X, Y, Z axes |
| Remote Control |
Power on : 3.3VDC < R.C ~ com < 12VDC or open circuit |
|
Power off : R.C ~ com < 0.4VDC or short circuit (PIN5,6 & PIN11) |
| Dimensions |
50.8 x 26 x 10.7mm |
NID60S48-24 Specifications
| Part Number |
Voltage (max/rated) | Current (amps) | Power (watts) | R&N (mV) | Efficiency (%) |
| NID60S48-24
|
24V
|
2.5A
|
60W
|
200mV
|
95%
|
NID60S48-24 Specifications
| Input Voltage | Normal Input Voltage | Input Current Full Load | Input Current No Load | Output Voltage | Output Current | Rated Pwr | R&N | Eff. |
| 30 ~ 53VDC | 48VDC | 1320mA | 50mA | 24V | 0 ~ 2.5A | 60W | 200mV | 95% |
Download Range Datasheet 