| Input Voltage |
90 ~ 264VAC 127 ~ 370VDC |
| Input Frequency |
47 ~ 63Hz |
| Power Factor |
PF>0.95/230VAC PF>0.95/115VAC at full load PF >0.9 at 75 ~ 100% load |
| Input Current |
12V:0.8A/115VAC 0.4A/230VAC15V:0.9A/115VAC 0.45A/230VAC |
|
20V ~ 48V:1.1A/115VAC 0.55A/230VAC |
| Inrush Current |
40A/230VAC cold start |
| Leakage Current |
<0.75mA / 240VAC |
| Line Regulation |
±1.0% |
| Load Regulation |
±2.0% |
| Set Up, Rise Time |
1200ms, 80ms/230VAC 1200ms, 80ms/115VAC at full load |
| Hold Up Time |
60ms/230VAC 30ms/115VAC at full load |
| Over Current Protection |
95 ~ 102% |
|
Constant current limiting, recovers automatically after fault condition is removed |
| Over Voltage Protection |
Shut down and latch off o/p voltage, re-power on to recover |
| Over Temperature Protection |
90°C ±10°C (RTH2) |
|
Shut down o/p voltage, re-power on to recover |
| Working Temperature |
-30°C ~ +50°C (Refer to output load derating curve) |
| Working Humidity |
20 ~ 95% RH non-condensing |
| Storage Temperature, Humidity |
-40°C ~ +80°C, 10 ~ 95% RH |
| Temperature Coefficient |
±0.03%/°C (0 ~ 50°C) |
| Vibration |
10 ~ 500Hz, 2G 12min./1cycle, period for 72min. each along X, Y, Z axes |
| Withstand Voltage |
I/P-O/P:3.75KVAC I/P-FG:1.88KVAC O/P-FG:0.5KVAC |
| Isolation Resistance |
I/P-O/P, I/P-FG, O/P-FG:100M Ohms / 500VDC / 25°C/ 70% RH |
| Safety Standards |
UL1310 Class 2, EN61347-1, EN61347-2-13 independent,UL60950-1, TUV EN60950-1, |
|
UL879 ( listed in ULSign Components Manual (SAM) )CAN/CSAC22.2 No. 223-M91(except for 48V) approved |
| EMC |
Compliance to EN55015, EN55022 (CISPR22) Class B; EN61000-3-2,-3, Class C (70% load); EN61000-3-3; |
|
EN61000-4-2,3,4,5,6,8,11; ENV50204, EN61547, EN55024, light industry level, (surge 4KV), criteria A |
| MTBF |
297.9Khrs min. MIL-HDBK-217F (25°C) |
| Dimensions |
200.5 x 70.5 x 35mm |
.jpg)
.jpg)
.jpg)
Download Range Datasheet 
