| Input Voltage |
90~264VAC |
| Input Frequency |
47 ~ 63Hz |
| Power Factor |
PF>0.95/230VAC PF>0.98/115VAC at full load |
| AC Current |
12V : 0.8A/115VAC 0.4A/230VAC |
|
15V : 0.9A/115VAC 0.45A/230VAC |
|
20V ~ 48V : 1.1A/115VAC 0.55A/230VAC |
| Inrush Current |
40A at 230VAC, cold start |
| Leakage Current |
0.5mA/240VAC |
| Voltage Adjustment Range |
0% ~ -15% fixed output (by customer choice) |
| Current Adjustment Range |
3% ~ -25% fixed output (by customer choice) |
| Voltage Tolerance |
±5.0% |
| Line Regulation |
±1.0% |
| Load Regulation |
±2.0% |
| Setup, Rise Time |
1200mS, 80mS/230VAC 1200mS, 80mS/115VAC at full load |
| Hold Up Time |
60mS/230VAC 16mS/115VAC at full load |
| Over Current Protection |
95% ~ 100% |
|
Constant current limiting, recovers automatically once fault condition removed |
| Over Voltage Protection |
Shut down output voltage, repower on to recover |
| Over Temperature Protection |
90°C ±10°C (RTH2) |
|
Shut down output voltage, repower on to recover |
| Working Temperature |
-30°C to +70°C (refer to derating curve) |
| Working Humidity |
20% ~ 90% RH non-condensing |
| Storage Temperature, Humidity |
-40°C to +80°C, 10% ~ 95% RH |
| Temperature Coefficient |
±0.03%/°C (0°C to 50°C) |
| Vibration |
10~500Hz, 2G 10min./1 cycle. period for 60 min. each along X, Y, Z axes |
| Safety Standards |
UL1310 Class 2, TUV EN60950-1, CAN/CSA C22.2 No. 223-M91 (except 48V) & IP67 Approved |
| Withstand Voltage |
I/P-O/P : 4.25KVAC |
| Isolation Resistance |
I/P-O/P : 100MOhms/500VDC |
| EMC |
EN55022 (CISPR22) Class B, EN61000-3-2,-3; EN61000-4-2,3,4,5,6,8,11; ENV50204 |
|
EN55024, Light industry level, Criteria A compliance |
| MTBF |
301Khrs min. MIL-HDBK-217F (20°C) |
| Dimensions |
222 x 68 x 39mm |
| Input Connection |
UL E88265-1, 18AWGx3C; 30cm |
| Output Connection |
UL 1185, 18AWGx2C; 30cm |
.jpg)
