| Input Voltage |
90 ~ 280Vac 127 ~ 396Vdc |
| Input Frequency |
47 ~ 63Hz |
| Power Factor |
PF>0.95/230Vac PF>0.98/115Vac at full load |
| Input Current |
2A/ 115Vac 1A/ 230Vac |
| Inrush Current |
60A/230Vac cold start |
| Leakage Current |
<2mA/ 240Vac |
| Current Adj. Range |
Can be adjusted by internal potential meter or through output cable |
| Line Regulation |
±0.5% |
| Set Up, Rise Time |
3000ms, 80msat full load 230VAC /115VAC |
| Hold Up Time |
50ms / 230VAC 16ms / 115VAC at full load |
| Over Current Protection |
100 ~ 110% rated output power |
|
Constant current limiting, recovers automatically after fault condition is removed |
| Over Voltage Protection |
Shut down and latch off o/p voltage, re-power on to recover |
| Over Temperature Protection |
10010(RTH2) |
|
Shut down o/p voltage, re-power on to recover |
| Working Temperature |
-30°C ~ +55°C @ full load ; +70°C @ 60% load |
| Working Humidity |
20 ~ 90% RHnon-condensing |
| Storage Temperature, Humidity |
-40°C ~ +80°C, 10 ~ 95% RH |
| Temperature Coefficient |
±0.03%/°C (0 ~ 50°C) |
| Vibration |
10 ~ 500Hz, 2G 10min./1cycle, period for 60min. each along X, Y, Z axes |
| Withstand Voltage |
I/P-O/P:3KVAC I/P-FG:1.5KVAC O/P-FG:0.5KVAC |
| Isolation Resistance |
I/P-O/P, I/P-FG, O/P-FG:100M Ohms/500VDC 25°C 70%RH |
| Safety Standards |
UL60950-1, TUV EN60950-1, EN61347-1, EN61347-2-13 approved, meet IP65 or IP67 protection level |
| EMC |
Compliance to EN55015, EN55022 (CISPR22) Class B; EN61000-3-2 Class C (>50% load) ; EN61000-3-3; |
|
EN61000-4-2,3,4,5,6,8,11; ENV50204, EN61547, EN55024, light industry level, criteria A |
| MTBF |
303.7Khrs min. MIL-HDBK-217F (25°C) |
.jpg)
