General Specifications
| Input Voltage |
90 ~ 264Vac 135 ~ 370Vdc |
| Input Frequency |
47 ~ 63Hz |
| Input Current |
0.5A / 100Vac |
| Inrush Current (max) |
40A / 230VAC |
| Leakage Current (max) |
0.75mA / 240Vac |
| Voltage Adj. Range |
Fixed |
| Line Regulation |
±1.0% |
| Set Up, Rise, Hold Time |
300ms, 100ms, 16ms at full load |
| Over Load Protection |
Hiccup mode, recovers automatically after fault condition is removed |
| Over Voltage Protection |
105 ~ 135% rated output voltage |
|
Clamp by zener diode, output short |
| Working Temperature |
0 ~ +50°C (refer to output load derating curve) |
| Workinig Humidity |
20% ~ 90% RH non-condensing |
| Storage Temperature, Humidity |
-20 ~ +85°C, 10 ~ 95% RH |
| Temperature Coefficient |
±0.03% / °C (0 ~ 50°C) |
| Vibration |
10 ~ 500Hz, 2G 10min./1 cycle, period for 60min. each along X, Y, Z axes |
| Withstand Voltage |
I/P-O/P:3KVAC |
| Isolation Resistance |
I/P-O/P:100M Ohms / 500VDC |
| Safety Standards |
UL60950-1, CSA22.2, EN60950-1, BSMA CNS 14336, CCC GB4943 Approved |
| EMC |
Compliance to EN55022 class B; EN61000-3-2,3; |
|
EN61000-4-2,3,4,5,6,8,11, Light industry level, Criteria A |
| MTBF |
500Khrs min. MIL-HDBK-217F (25°C) |
| Connector Plug |
Standard type P1J: 2.1mm x 5.5mm x 11mm, turning fork type center positive |
| Connector Cable |
Standard type UL1185 6ft (with ferrite core) |
|
.jpg)
