GC30B-0P1J - 16.8W 4.2V 4A Lithium ion Battery Charger
Home > Products > GC30B Series 30W AC-DC Power Adapter with Charging Function > 16.8W 4.2V 4A Lithium ion Battery Charger
.jpg)
|
DescriptionUniversal AC input 30W lithium ion battery chargers designed with energy saving and the environment in mind, they also comply with global safety requirements and the 2002/95/EC RoHS requirements. No load power consumption <1W, dual colour LED, to indicate charging status, and built in short curcuit, over load, over voltage and over temperature protections are the main features of this series. GC30 is especially suitable for charging lithium ion batteries in all kinds of end product and the peak current capability means it can be used for equipment that needs a high start up current.
Standards
|
General Specifications
| Input Voltage |
90 ~ 264Vac 127 ~ 370Vdc |
| Input Frequency |
47 ~ 63Hz |
| Input Current |
1A/ 100Vac |
| Inrush Current |
40A/ 230Vac |
| Leakage Current |
0.25mA/ 240Vac |
| LED Indicator |
Green LED ON : <200mA Red LED ON : >200mA of charge current |
| Set Up, Rise, Hold Time |
200ms, 50ms, 16ms at full load |
| Over Load Protection |
90 ~ 110% Constant current mode and over 300% pulsing mode |
|
Constant current limiting, recovers automatically after fault condition is removed |
| Over Voltage Protection |
110 ~ 135% rated output voltage |
|
Clamp by zener diode |
| Over Temperature Protection |
IC1Tj130°C |
|
Shut down o/p voltage, recovers automatically after temperature goes down |
| Working Temperature |
0°C to +50°C (Refer to output load derating curve) |
| Working Humidity |
20% ~ 90% RH non-condensing |
| Storage Temperature, Humidity |
-20°C to +85°C, 10 ~ 95% RH |
| Temperature Coefficient |
±0.03%/°C (0 ~ 50°C) |
| Vibration |
10 ~ 500Hz, 2G 10min./1cycle, period for 60min.each along X,Y, Z axes |
| Withstand Voltage |
I/P-O/P:3KVAC |
| Isolation Resistance |
I/P-O/P:100M Ohms / 500VDC / 25°C/ 70% RH |
| Safety Standards |
UL60950-1, CSA22.2, EN60950-1 Approved |
| EMC |
Compliance to EN55014-1 class B, FCC part 15 Class B, EN61000-3-2,3, |
|
EN61000-4-2,3,4,5,6,11, Light industry level, criteria A |
| DC Plug |
2.1 x 5.5 x 11mm centre positive tuning fork connector |
| DC Cable |
18AWG UL1185 6ft and 4ft for 4.2~8.4V output only |
|
GC30B-0P1J Output Data
|
DC Volt Set At
|
Rated Current
|
Current Range
|
Rated Pwr
|
R&N
|
Charging Volt. Rng.
|
Line Reg.
|
Eff.
|
|
4.2V
|
4A
|
0 ~ 4A
|
16.8W
|
50mV
|
3.6 ~ 4.4V
|
±1.0%
|
55%
|
|
 |
| Add this product to your ClipBook |
.jpg)
