OFM-5002 - 5W Single Output Open Framed Power Supply
Home > Products > OFM-5000 Series 5W Single Output Open Framed Power Supply > 5W Single Output Open Framed Power Supply
|
Standards
|
General Specifications
| Input voltage |
85~264VAC 120~370VDC |
| Input frequency |
47-440Hz |
| AC current (typ.) |
0.13A/115VAC 0.11A/230VAC |
| Inrush current |
Cold start, 12A/115V 24A/230VAC |
| Voltage tolerance |
±2.0% |
| Setup, rise time |
150ms, 20ms/230VAC 150ms, 20ms/ 115VAC at full load |
| Hold time (typ.) |
120ms/230VAC 24ms/115VAC at full load |
| Overload protection |
Above 150% rated output power. |
|
Protection type: Hiccup mode, recovers automatically after fault condition has been removed. |
| Over voltage protection |
Protection type: Shut down o/p voltage, re-power on to recover. |
| Over temperature |
Tj 145°C typically (U1) Detect on main control IC |
|
Protection type: Shut down o/p voltage, recovers automatically after temperature goes down. |
| Working temperature |
-10 ~+ 60°C (refer to output load derating) |
| Working humidity |
20 ~ 90% RH non-condensing |
| Storage temp., humidity |
-20~+85°C, 10 ~ 95% RH |
| Temp. coefficient |
±0.03%/°C (0~50°C) |
| Vibration |
10 ~ 500Hz, 2G 10min./1 cycle, Period for 60min.each along X,Y,Z axes |
| MTBF |
552.5Khrs min. MIL-HDBK-217F (25°C |
| Safety standard |
UL1950, TUV EN60950 approved |
| Withstand voltage |
I/P-O/P:3KVAC |
| Isolation resistance |
I/P-O/P:100M Ohms/500VDC |
| EMI conduction & radiation |
Compliance to EN50081-1, EN50082-1 |
|
Output Data
|
DC Voltage
|
Rated current
|
Current range
|
Rated power
|
R & N (max)
|
Voltage adj. range
|
Line regulation
|
Load regulation
|
Efficiency (typ)
|
OVP
|
|
12V
|
0.42A
|
0~0.42A
|
5.04W
|
150mVp-p
|
10.8~13.2V
|
±0.3%
|
±1.0%
|
67%
|
13.8~16.2V
|
|
 |
| Add this product to your ClipBook |
.jpg)
