PB-360P-24 - 360W 24V 12.5A PFC Single Output Battery Charger
Home > Products > PB-360P Series 360W PFC Single Output Battery Charger > 360W 24V 12.5A PFC Single Output Battery Charger
.jpg)
|
DescriptionDesigned for lead acid batteries featuring 3 stage charging characteristics, automated derating capability for charging current under high ambient temperatures, these intelligent chargers will quickly and efficiently feed your hungry batteries and ensure the lifetime of them at the same time. With the passive PFC function PB-360 can comply with the harmonic requirements of EN61000-3-2. Equiped with an IEC320 C14 AC Inlet and ON/OFF switch this unit is very convenient for both household and general consumer use. The 48.5mm low profile design also solves a lot of installation troubles and space issues. With reverse polarity, short circuit, overload, over voltage and over temperature protections it is ideally suited as a main power source or back up system.
Standards
|
General Specifications
| Input Voltage |
90 to 132VAC / 180 to 264VAC selected by switch |
| Input Frequency |
47 to 63Hz |
| Power Factor |
>0.65 typically at 230VAC |
| AC Current |
7A/115VAC 3.5A/230VAC |
| Inrush Current |
60A cold start |
| Leakage Current |
<3.5mA / 240VAC |
| Battery Type |
Open & Sealed Lead Acid |
| Overl Load Protection |
90 to 110% rated output current |
|
Constant current limiting, recovers automatically after fault condition is removed |
| Over Temperature Protection |
Automatically derate charge current until zero |
| Working Temperature |
-20°C to +60°C (Refer to output load derating curve) |
| Working Humidity |
20% to 90% RH non-condensing |
| Storage Temperature, Humidity |
-40°C to +85°C, 10% to 95% RH |
| Temperature Coefficient |
±0.05%/°C (0°C to 45°C) |
| Vibration |
10 to 500Hz, 2G 10min./1cycle, 60min. each along X, Y, Z axes |
| Safety Standards |
EN60335-2-29 CB Approved by TUV |
| Withstand Voltage |
I/P-O/P:3KVAC I/P-FG:1.5KVAC O/P-FG:0.5KVAC |
| Isolation Resistance |
I/P-O/P, I/P-FG, O/P-FG:100M Ohms/500VDC |
| EMC |
Compliance to EN55022 (CISPR22) Class B, EN61000-3-2,-3 |
|
EN61000-4-2,3,4,5,6,8,11; ENV50204, EN55024, Light industry level, criteria A |
| MTBF |
115.8Khrs minimum. MIL-HDBK-217F (25°C) |
|
PB-360-24 Output Data
|
Boost Charge Volt
|
Float Charge Volt
|
Voltage Adj.
|
Recommended Batt. Cap.
|
Output Current
|
Eff.
|
|
28.8V
|
27.2V
|
26 ~ 28.8V
|
40 ~ 125Ah
|
12.5A
|
86%
|
|
 (300KB)
|
| Add this product to your ClipBook |
Related Documents
|
.jpg)
