MEAN WELL Products
Description
ASP-150 is a 150W open frame type switching power supply (mainly AS-120P removed from the plastic case)and a new addition to our AC/DC product line. Featuring low no load power consumption and built-in active PFC function the units has been designed based ont he energy saving concern that is critical to consumer electronic applications. Thanks to the leading edge ZCS/ZVS technology the efficiency is as high as 90% and hence can provide 150W by only free air convection. ASP-150 mainly targets general industrial applications with space contraints as its 28.5mm low profile will fit prefectly in any 1U equipment.
Additional information
| Standards | CB, CE, CSUUS, PFC |
|---|---|
| Type | AC/DC |
| Outputs | Single |
- Universal AC input/Full range
- Built-in active PFC function, PF>0.95
- Short circuit, over load, over voltage & over temperature protections
- Cooling by free air convection
- ZCS/ZVS technology to reduce power dissipation
- High power density 8.5W/in³
- No load power consumption <1W at 240VAC
- 100% full burn in test
- cUL, CB & CE Approvals
- Industrial equipment
| Input Voltage | 90 ~ 264VAC 127 ~ 370VDC |
| Input Frequency | 47 ~ 63Hz |
| Power Factor | PF >0.95/230VAC PF >0.98/115VAC at full load typically |
| AC Current | 2A/115VAC 1A/230VAC |
| Inrush Current | 80A/230VAC |
| Leakage Current | <2mA / 240VAC |
| Setup, Rise Time | 3000ms, 80ms at full load |
| Hold Up Time | 50ms/230VAC 16ms/115VAC at full load typically |
| Over Load Protection | 105 ~ 135% rated output power |
| Hiccup mode, recovers automatically after fault condition is removed | |
| Over Voltage Protection | Shut down o/p voltage, re-power on to recover |
| Over Temperature Protection | 90°C ±15°C (RTH2) Detect on heatsink of power transistor |
| Shut down o/p voltage, re-power on to recover | |
| Working Temperature | -20°C ~ + 60°C with cooling fan (Refer to output load derating curve) |
| Working Humidity | 20% ~ 90% RH non-condensing |
| Storage Temperature, Humidity | -20°C ~ +85°C , 10 ~ 95% RH |
| Temp. Coefficient | ±0.05% /°C (0 ~ 50°C) |
| Vibration | 10 ~ 500Hz, 2G 10min./1cycle, period for 60min. each along X, Y, Z axes |
| Safety Standards | UL60950-1, CB (IEC60950-1) Approved |
| Withstand Voltage | I/P-O/P:4.25KVDC I/P-FG:1.5KVAC O/P-FG:0.5KVAC |
| Isolation Resistance | I/P-O/P, I/P-FG, O/P-FG:100M Ohms/500VDC |
| EMC | Compliance to EN55022 (CISPR22) Class B, EN61000-3-2,3 |
| EN61000-4-2,3,4,5,6,8,11, ENV205204 Light industry level, criteria A | |
| MTBF | 149.3Khrs min. MIL-HDBK-217F (25°C) |
- CB
- CE
- CSUUS
- PFC
