| Input Voltage |
90 ~ 264Vac 135 ~ 370Vdc |
| Inputt Frequency |
47 ~ 63Hz |
| Input Current |
1A / 100Vac |
| Inrush Current |
60A / 230Vac |
| Leakage Current |
0.25mA / 240Vac |
| Voltage Adjustment Range |
Fixed output by internal VR |
| Set Up, Rise, Hold Time |
200ms, 50ms, 16ms at full load |
| Over Load Protection |
150 ~ 450% rated output power |
|
Hiccup mode, recovers automatically after fault condition is removed |
| Over Voltage Protection |
110 ~ 140% rated output voltage |
|
Shut down o/p voltage, re-power on to recover |
| Over Temperature Protection |
IC1Tj135°C |
|
Shut down o/p voltage, recovers automatically after temperature goes down |
| Working Temperature |
0°C ~ +40°C (refer to putput load derating curve) |
| Workinig Humidity |
20% ~ 90% RH non-condensing |
| Storage Temperature, Humidity |
-20°C ~ +85°C, 10 ~ 95% RH |
| Temperature Coefficient |
±0.03% /°C (0 ~ 50°C) |
| Vibration |
10 ~ 500Hz, 2G 10min./1 cycle, period for 60min. each along X, Y, Z axes |
| Withstand Voltage |
I/P-O/P:3KVAC |
| Isolation Resistance |
I/P-O/P:100M Ohms / 500VDC |
| Safety Standards |
UL1950, CSA22.2, EN60950-1 Approved |
| EMC |
Compliance to EN55022 (CISPR22) class B; EN61000-3-2,3 |
|
EN61000-4-2,3,4,5,6,11, ENV50204, Light industry level, Criteria A |
| MTBF |
500Khrs min. MIL-HDBK-217F (25°C) |
| DC Connector |
2.1 x 5.5 x 11mm, centre positive |
| DC Cable |
16AWG 1230 +100/-0 for 3.3V, 5V |
|
16AWG 1830 +100/-0 for 7.5V |
|
18AWG 1830 +100/-0 for others |
.jpg)
.jpg)
