.jpg)
LPLC-18 Series are constand current LED Lighting Power Supplies with an input range of 90 ~ 132VAC, output current options of 350mA & 700mA and output voltage ranges of 6~48V & 6~25V.
| Input Voltage | 90 ~ 132VAC |
|---|---|
| Input Frequency | 47 ~ 63Hz |
| Input Current | 0.5A/115VAC |
| Inrush Current | 40A/115VAC cold start |
| Leakage Current | 0.25mA/ 120VAC |
| Output Voltage Tolerance | ±5.0% |
| Line Regulation | ±1.0% |
| Load Regulation | ±3.0% |
| Set Up, Rise Time | 3600ms, 150ms / 115VAC |
| Hold Up Time | 20ms/115VAC at full load |
| Current Limit Protection | ±5% rated output current |
| Constant current limiting type | |
| Over Voltage Protection | Shut off o/p voltage, clamping by zener diode |
| Over Temperature Protection | Tj 140 typically (U1) Detect on main control IC |
| Hiccup mode, recovers automatically after temperature goes down | |
| Working Temperature | -30°C ~ 70°C (Refer to output load derating curve) |
| Working Humidity | 20 ~ 90% RH non-condensing |
| Storage Temperature, Humidity | -40°C ~ +80°C, 10 ~ 95% RH |
| Temperature Coefficient | ±0.2%/°C (0 ~ 50°C) |
| Vibration | 10 ~ 500Hz, 2G 10min./1cycle, period for 60min. each along X, Y, Z axes |
| Withstand Voltage | I/P-O/P:3KVAC |
| Isolation Resistance | I/P-O/P:>100M Ohms / 500VDC / 25°C/ 70% RH |
| Safety Standards | Design refer to UL1310 Class 2,TUV EN60950-1, EN61347-2-13, CAN/CSAC22.2 No. 223-M91, IP67 approved |
| EMC | Compliance to EN55022 (CISPR22) Class A; EN61000-3-2,-3; ENV50204; |
| EN61000-4-2,3,4,5,6,8,11; EN55024, Light industry level, criteria A | |
| MTBF | 1200.6K hrs min. MIL-HDBK-217F (25°C) |
| Dimensions | 140 x 30 x 20mm |
| Part Number | Voltage (max/rated) | Current (amps) | Power (watts) | R&N (mV) | Efficiency (%) |
|---|---|---|---|---|---|
| LPLC-18-700 | 25V | 1A | 18W | 250mV | 80% |
| LPLC-18-350 | 48V | 0.35A | 17W | 300mV | 82% |