MEAN WELL Products

HomeMEAN WELL ProductsDC/AC Power InvertersTS-200 Series 200W True Sine Wave DC/AC Power Inverter

TS-200 Series - TS-200 Series 200W True Sine Wave DC/AC Power Inverter

200W True Sine Wave DC/AC Power Inverter

Email
SKU: TS-200 Series Category:

Description

TS-200 Series are high performance DC/AC power inverters released to cover lower wattage applications. Using high frequency circuit topology this true sine wave inverter has efficiency up to 88%. Capabile of providing 200W continously as well as a peak load of 230W for 180 seconds, 300W for 10 seconds or 400W surge power for 30 utility cycles. The output AC voltage and frequency of TS-200 can be easily adjusted via the front panel. TS-200 is suitable for powering all kinds of home appliances, power tools, and office & portable equipment in vehicles, yachts, mobile homes or places that the utility can’t be reached or the power quality is poor.

Samples available Q4 2009
Safety Aprovals Q4 2009

Additional information

Standards

CE

Type

DC/AC,Power Inverter,True Sine Wave

Range Power

Outputs

Single

Rated Power 200W
Maximum Output Power 230W for 180 sec. / 300W for 10 sec./ surge power 400W for 30 cycles
AC Voltage Factory setting set at 110VAC 100 / 110 / 115 / 120VAC selectable by setting button S.W
Factory setting set at 230VAC 200 / 220 / 230 / 240VAC selectable by setting button S.W
Output Frequency 110VAC 60±0.1Hz 50/60Hz selectable by setting button
230VAC 50±0.1Hz 50/60Hz selectable by setting button
Waveform True sine wave (THD<3%) at rated input voltage
AC Regulation ±3.0%
Front Panel Indicator Operation status ; Green : normal, Orange(flashing) : remote control OFF, Red : abnormal
Input Off Mode Current Draw <1mA
Battery Types Open & sealed Lead Acid
Battery Polarity By internal fuse open
Over Temperature Protection Shut down o/p voltage, re-power on to recover; by internal RTH1 detect power MOSFET
Output Short Protection Shut down o/p voltage, re-power on to recover
Over Load Protection 105 ~ 115% load for 180 sec., 115% ~ 150% load for 10 sec.
Shut down o/p voltage, re-power on to recover
GFCI Protection Optional on 110VAC models, Type F only
Working Temperature 110VAC models -10°C ~ +35°C @ 100% load ; +60°C @ 50% load
230VAC -10°C ~ +40°C full load, +60°C 50% load
Working Humidity 20% ~ 90% RH non-condensing
Storage Temperature, Humidity -30°C ~ +70°C/ -22 ~ +158°F, 10 ~ 95% RH
Vibration 10 ~ 500Hz, 3G 10min./1cycle, 60min. each along X, Y, Z axes
Safety Standards 110VAC model design refers toUL458
LVD 230VAC model refers to EN60950-1
Withstand Voltage Bat I/P-AC O/P:3.0KVAC AC O/P- FG:1.5KVAC
Isolation Resistance Bat I/P-AC O/P,AC O/P-FG:100M Ohms / 500VDC / 25°C/ 70% RH
EMC 110VAC models comply to FCC class A
230VAC models comply to EN55022 classA, 72/ 245/ CEE, 95/ 54/ CE, E-Mark, EN61000-4-2,3,8 ENV50204
Dimensions 205 x 158 x 59mm
  • CE