| Input Voltage |
90 ~ 264Vac |
| Input Frequency |
47 ~ 63Hz |
| Power Factor |
PF>0.95/230vAC pfc>0.98/115Vac at full load |
| AC Current |
3A/115Vac 1.5A/230Vac |
| Inrush Current |
50A, cold start |
| Leakage Current |
<3.5mA/240Vac |
| Battery Type |
Open & Sealed Lead Acid |
| Over Load Protection |
90 ~ 110% rated output current |
|
Constant current limiting, recovers automatically after fault condition is removed |
| Over Voltage Protection |
Shut down o/p voltage, re-power on to recover |
| Over Temperature |
Automatically derate charge current until zero |
| Remote Control (CN105) |
Open: Normal operation Short: Stop charging |
| Fan Control |
RTH3>50°C Fan ON, <45°C Fan OFF (Typ.) |
| Temperature Rise |
By NTC |
| Working Temperature |
-20°C ~ +50°C (Refer to output load derating curve) |
| Working Humidity |
20 ~ 90% RH non-condensing |
| Storage Temperature, Humidity |
-40°C ~ +85°C, 10 ~ 95% RH |
| Temperature Coefficient |
±0.03%/°C (0 ~ 50°C) |
| Vibration |
10~500Hz, 2G 10min./1 cycle, 60min. each along X, Y, Z axes |
| Safety Standards |
UL1012 (for PB-230-xxAD1 only), TUV EN60950-1 approved |
| Withstand Voltage |
I/P-O/P:3KVAC I/P-FG:1.5KVAC O/P-FG:0.5KVAC |
| Isolation Resistance |
I/P-O/P, I/P-FG, O/P-FG:100M Ohms / 500VDC / 25°C / 70% RH |
| EMC |
Compliance to EN55022 (CISPR22) Class B, EN61000-3-2,-3; ENV50204 |
|
EN61000-4-2,3,4,5,6,8,11; EN55024, light industry level, criteria A |
| MTBF |
244.5Khrs min. MIL-HDBK-217F (25°C) |
| Plug |
Standard = 4 pin power din AD1=Anderson Connector |
| DC Cable |
115cm ±5cm |