| Volttage range |
90 ~ 264VAC 135 ~ 370VDC |
| Frequency Range |
47 ~ 63Hz |
| AC current |
0.8A / 100VAC |
| Inrush current (max) |
60A / 230VAC |
| Leakage current (max) |
0.75mA / 240VAC |
| Rated power |
25W |
| Voltage adj. range |
Fixed |
| Voltage tolerance |
±5.0% |
| Line regulation |
±1.0% |
| Load regulation |
±4.0% |
| Setup, rise, hold time |
200ms, 50ms, 16ms at full load |
| Over load protection |
115 ~ 160% rated output power |
|
Protection type:Hiccup mode, recovers automatically after fault condition is removed |
| Over voltage protection |
+5V: 110% ~ 140% rated output voltage |
|
Protection type: Shut down o/p voltage, re-power on to recover |
| Over temp. protection |
IC1Tj135°C Protection type: Shut down o/p voltage, recovers automatically after temp. goes down |
| Working temp. |
0~+40°C (refer to output load derating curve) |
| Working humidity |
20% ~ 90% RH non-condensing |
| Storage temp., humidity |
-20 ~+85°C 10 ~ 95% RH |
| Temp. coefficient |
±0.03% / °C (0 ~ 50°C) |
| Vibration |
10 ~ 500Hz, 2G 10min. /1 cycle, period for 60min. each along X, Y, Z axes |
| MTBF |
520K hrs min. MIL-HDBK-217F (25°C) |
| Safety standards |
UL1950, CSA22.2, EN60950 Approved |
| Withstand voltage |
I/P-O/P:3KVAC, I/P-FG:1.5KVAC |
| Isolation resistance |
I/P-O/P, I/P-FG:100M Ohms / 500VDC |
| EMI conduction & radiation |
Compliance to EN55022 (CISPR22) Class B |
| Harmonic current |
Compliance to EN61000-3-2,3 |
| EMS immunity |
Compliane to EN61000-4-2,3,4,5,6,11, Light industry level, criteria A |
| Connector plug |
Standard type R1B: DIN 5PIN |
| Connector cable |
Standard type UL2464 18AWGx3C shield wire |
.jpg)
