LPV-35 Series - 35W Single Output IP66 Switching Power Supply
Home > Products > 35W Single Output IP66 Switching Power Supply
Features- Constant voltage mode power supply
- Universal AC input / Full range
- Withstand 300VAC surge input for 5 seconds
- Short circuit, over load, over voltage protections
- Fully isolated plastic case
- Cooling by free air convection
- 100% full load burn-in test
- Low cost, high reliability
Applications- moving signs
- Backlighting
- LED-based decorative lighting
- LED-based architectural lighting
- LED stage and theater lighting
- LED electronic displays
DescriptionLPV-35 Series are 35W AC/DC enclosed, non PFC design, switching power supplies. LPV-35 models offer constant voltage mode and high IP rating to protect the electronic components from dust and moisture, making suitable for use in harsh locations. LPV-35 Series possesses high efficiency and can operate between -30°C ~ +70°C using only free air convection. To protect the unit from sudden high surge for unstable AC line, LPV-35 can withstand 300VAC input surge for 5 seconds.
|
Standards
|
|
Specification
| Input Voltage |
90 ~ 264Vac |
| Input Frequency |
47 ~ 63Hz |
| Input Current |
1.1A/115Vac 0.7A/230Vac |
| Inrush Current |
30A/115Vac 60A/230Vac, cold start |
| Leakage Current |
0.25mA/ 240Vac |
| Line Regulation |
±1.0% |
| Set Up, Rise Time |
500ms, 20ms / 230Vac 500ms, 20ms / 115Vac at full load |
| Hold Up Time |
50ms/230Vac 16ms/115Vac at full load |
| Over Current Protection |
110 ~ 150% rated output power |
|
Hiccup mode, recovers automatically after fault condition is removed |
| Over Voltage Protection |
Shut down o/p voltage, re-power on to recover |
| Working Temperature |
-30°C~ +75°C (Refer to output load derating curve) |
| Working Humidity |
20 ~ 90% RH non-condensing |
| Storage Temperature, Humidity |
-40°C ~ +80°C, 10 ~ 95% RH |
| Temperature Coefficient |
±0.03%/°C (0 ~ 50°C) |
| Vibration |
10 ~ 500Hz, 2G 10min./1cycle, period for60min. each along X,Y, Z axes |
| Withstand Voltage |
I/P-O/P:3KVAC |
| Isolation Resistance |
I/P-O/P:>100M Ohms/500VDC 25°C 70%RH |
| Safety Standards |
Design refer to UL1310 Class 2,TUV EN60950-1, CAN/CSAC22.2 No. 223-M91, EN61347-2-13, IP66 |
| EMC |
Compliance to EN55022 (CISPR22) Class B; EN61000-3-2,-3; ENV50204; |
|
EN61000-4-2,3,4,5,6,8,11; EN55024, light industry level, criteria A |
| MTBF |
743.5Khrs min. MIL-HDBK-217F (25°C) |
|
Items
LPV-35 Series Specifications
|
Part No
|
Voltage
|
Rated Current
|
Current Range
|
Rated Pwr
|
R&N
|
Volt. Tol.
|
Load Reg
|
Eff.
|
OVP
|
|
LPV-35-5
|
5V
|
6A
|
0 ~ 6A
|
30W
|
80mV
|
±6.0%
|
±4.0%
|
77%
|
5.75 ~ 6.75V
|
|
LPV-35-12
|
12V
|
3A
|
0 ~ 3A
|
36W
|
120mV
|
±5.0%
|
±2.0%
|
85%
|
13.8 ~ 16.2V
|
|
LPV-35-15
|
15V
|
2.4A
|
0 ~ 2.4A
|
36W
|
120mV
|
±5.0%
|
±2.0%
|
85%
|
17.25 ~ 20.25V
|
|
LPV-35-24
|
24V
|
1.5A
|
0 ~ 1.5A
|
36W
|
150mV
|
±5.0%
|
±2.0%
|
86%
|
27.6 ~ 32.4V
|
|
LPV-35-36
|
36V
|
1A
|
0 ~ 1A
|
36W
|
150mV
|
±5.0%
|
±2.0%
|
86%
|
41.4 ~ 48.6V
|
|
 (267KB)
|
.jpg)
