| Input Voltage Range |
90 ~ 295VAC 127 ~ 417VDC |
| Input Frequency |
47 ~ 63Hz |
| Power Factor |
PF>0.9 at 60 ~ 100% load, 115VAC / 230VAC ; PF>0.99 / 115VAC PF>0.95 / 230VAC at full load |
| Input Current |
1.1A/115VAC 0.55A/230VAC |
| Inrush Current |
40A/230VAC |
| Leakage Current |
<0.75mA/ 240VAC |
| Voltage Tolerance |
±10% |
| Line Regulation |
±3.0% |
| Load Regulation |
±5.0% |
| Set Up Time |
3000ms / 230VAC 5000ms / 115VAC at full load |
| Over Current Protection |
110% (max); 95 ~ 110% on 15V model |
|
Constant current limiting, recovers automatically after fault condition is removed |
| Short Circuit Protection |
Hiccup mode, recovers automatically after fault condition is removed |
| Over Voltage Protection |
Shut down o/p voltage, re-power on to recover |
| Over Temperature Protection |
85°C ±10°C (TSW1) detect on heatsink of power transistor |
|
Shut down o/p voltage, recovers automatically after temperature goes down |
| Working Temperature |
-30°C ~ +70°C (Refer to output load derating curve) |
| Working Humidity |
20 ~ 95% RH non-condensing |
| Storage Temperature, Humidity |
-40°C ~ +80°C, 10 ~ 95% RH |
| Temperature Coefficient |
±0.03%/°C (0 ~ 50°C) |
| Vibration |
10 ~ 500Hz, 5G 12min./1cycle, period for 72min. each along X, Y, Z axes |
| Safety Standards |
UL1310 Class 2, UL8750, SAM list UL879,TUV EN61347-1, EN61347-2-13, |
|
CAN/CSAC22.2 No. 223-M91(except for 48V & 54V), IP66 approved |
| Withstand Voltage |
I/P-O/P:3.75KVAC I/P-FG:1.88KVAC O/P-FG:0.5KVAC |
| Isolation Resistance |
I/P-O/P:100M Ohms / 500VDC / 25°C/ 70% RH |
| EMC |
Compliance to EN55015; EN61000-3-2 Class C (>60% load); EN61000-3-3; |
|
EN61000-4-2,3,4,5,6,8,11; ENV50204, EN55024, EN61547, light industry level (surge 4KV), criteria A |
| MTBF |
Khrs min. MIL-HDBK-217F (25°C) |
| Dimensions |
172 x 62.5 x 40.5mm |
.jpg)
.jpg)
.jpg)
