Specification
| Input Voltage |
95 ~ 264VAC 140~370VDC |
| Input Frequency |
47~63Hz |
| Input Current |
1.9A / 100VAC |
| Inrush Current (max.) |
40A / 230VAC |
| Leakage Current (max.) |
0.75mA / 240VAC |
| Voltage Adjustment |
Fixed |
| Setup, Rise, Hold Time |
800ms, 50ms, 16ms at full load |
| Overload Protection |
110~160% rated output power |
|
Hiccup mode, recovers automatically after fault condition is removed |
| Over Voltage Protection |
110~140% rated output voltage |
|
Shut down o/p voltage, re-power on to recover |
| Working Temperature |
0°C to +40°C (Refer to output load derating curve) |
| Working Humidity |
20% to 90% RH non-condensing |
| Storage Temp., Humidity |
-20°C to +85°C, 10% to 95% RH |
| Temp. Coefficient |
±0.03% /°C (0~50°C) |
| Vibration |
10~500Hz, 2G 3 axes 10min./1cycle, period for 60min. each along X, Y, Z axes |
| Safety Standards |
UL1950, EN60950 Approved |
| Withstand Voltage |
I/P-O/P:3KVAC, I/P-FG:1.5KVAC |
| Isolation Resistance |
I/P-O/P, IP/FG:100M Ohms / 500VDC |
| EMC |
Compliance to EN55022 (CISPR22) Class B, EN61000-3-2,-3 |
|
EN61000-4-2,3,4,5,6,8,11, ENV50204, Light industry level, criteria A |
| MTBF |
100khrs min. MIL-HDBK-217F(25°C) |
| Connector Plug |
Standard type P2J: 2.1 x 5.5 x 11mm, center positive |
| Connector Cable |
Standard type 180cm SPT-1, 18Awg 2 core |
|
.jpg)
.jpg)
