HLN-80H-B Series - 80W Single Output Switch mode Power Supply IP64 rated
Home > Products > LED Power Supply > 80W Single Output Switch mode Power Supply IP64 rated
Features
- Universal AC input / Full range (up to 305VAC)
- Built-in active PFC function
- Protections: Short circuit / Overload / Over voltage / Over temperature
- Cooling by free air convection
- OCP point adjustable through output cable or internal potential meter
- Fully isolated plastic caseIP64 design for indoor or outdoor installations
- Three in one dimming function (1~10Vdc or PWM signal or resistor)
- Suitable for LED lighting and moving sign applications
- Compliance to worldwide safety regulations for lighting
- Suitable for dry / damp locations
- Constant current level adjustable through output cable with 1~10Vdc or 10V PWM signal or resistor
Specification
| Voltage Range |
90 ~ 305VAC 127 ~ 431VDC |
| Frequency Range |
47 ~ 63Hz |
| Input Current |
0.85A/ 115VAC 0.425A/ 230VAC 0.4A/ 277VAC |
| Inrush Current |
COLD START 70A/230VAC |
| Leakage Current |
<0.75mA/ 277VAC |
| Setup, Rise Time |
2000ms, 80ms / 115VAC at full load; 1000ms,80ms/230VAC at full load |
| Hold Up Time |
16msat full load 230VAC /115VAC |
| Over Current Protection |
95 ~ 108% |
| Over Temperature Protection |
100°C±10°C |
| Working Temperature |
-40 ~ +40°C@ full load; +50°C@ 60% load |
| Temperature Coefficient |
±0.03%/°C(0 ~ 40°C) |
| Vibration |
10 ~ 500Hz, 2G 12min./1cycle, period for 72min. each along X,Y, Z axes |
| Safety Standards |
EN61347-1, EN61347-2-13 independent, IP64 approved ; Design refer to UL60950-1,TUV EN60950-1 |
| EMC |
Compliance toEN55015 Class B; EN61000-3-2 Class C (60% load, 12V model) ; EN61000-3-3 |
|
EN61000-4-2,3,4,5,6,8,11; ENV50204, EN61547, EN55024, heavy industry level (surge 4KV), criteriaA |
| MTBF |
356.4Khrs min. MIL-HDBK-217F (25°C) |
HLN-80H-B Series Specifications
(788 KB)