Meanwell Power Supplies – Din Rail Power Supply

Our Din Rail Products are a fanless design for installation on TS35/7.5 or TS35/15 industrial rails available as a slim line 20 Watt unit through to our three phase 960 Watt unit. Models Include MDR-20 / MDR-40 / MDR-60 / MDR-100 / DR-30 / DR-45 / DR-60 / DR-75 / DR-100 / DR-120 / DRP-240 / DRP-480 / DRP-480S / DRH-120 / DRT-240 / DRT-480 / DRT-960 / DR-RDN20 / DR-UPS40 Known uses include general Industrial applications including factory automation, electro-mechanical industry, Data communications, IT, power distribution boxes, control panels, building automation and household appliance control.

	Home About MeanWell Products FAQ News Distributors Contact Us Site Map

	Mean Well Direct Ltd, Orion House, Calleva Park, Aldermaston, Berkshire, RG7 8SN. Tel: +44 (0)118 981 1001 Fax: +44 (0)118 981 2002 Web: www.meanwelldirect.co.uk

15W~24W AC-DC Single Output Interchangeable Wall Mounted Type AC Adapter
	GE24 Series are 15~24W AC-DC wall-mounted green adapters that comply with Energy Star Level V and...

75W DC-DC Half Brick Regulated Single Output Converter
	The MHB75 Series is a 75W DC-DC half brick converter with regulated single output and dimensions of...
All New Products

3000W DC/AC Inverter with Solar Charger
TN-3000 Series is a high performance true sine wave DC/AC power inverter that uses high frequency...
All Products in Development

	Features
Found 27 products. Displaying 1 to 20 1 2 »
Found 27 products. Displaying 1 to 20 1 2 »
DR-UPS40 Type - DC/DC	40A Uninterruptible Din Rail Power Supply Battery controller for DIN Rail UPS system Parallel connection to DC BUS Suitable for 24V system up to 40A Can be installed on DIN Rail TS35 / 7.5 or 15 Built-in battery test function Battery polarity protection Relay contact signal output and LED indicator for DC BUS OK,Battery OK, and Battery Discharge Cooling by free air convection
DR-RDN20 Type - DC/DC	Din Rail Redundant Module Suitable for redundant operation of 24V system Installed on DIN Rail TS35 / 7.5 or 15 Relay contact signal output and LED indicator for input failure alarm Cooling by free air convection
MDR-10 Series Type - AC/DC Outputs - Single Watts - 1W-10W	10W Single Output Industrial Din Rail Power Supply Universal AC input Short circuit, over load, over voltage protections Cooling by free air convection Can be installed on DIN rail TS-35/7.5 or 15 NEC class 2 / LPS compliant Built in DC OK active signal LED indicator for power on No load power consumption <0.75W 100% full load burn-in test Fixed output voltage
DR-15 Series Type - AC/DC Outputs - Single Watts - 11W-20W	15W Single Output Industrial DIN Rail Power Supply Universal AC input/Full range Short circuit, over load, over voltage protections Cooling by free air convection Can be installed on DIN rail TS-35/7.5 or 15 Isolation class II LED indicator for power on Operating temperature: -20°C ~ 60°C No load power consumption <0.5W 100% full load burn-in test
MDR-20 Series Type - AC/DC Outputs - Single Watts - 11W-20W	20W Miniature Single Output Din Rail PSU Universal AC input, full range Short circuit, over load, over voltage protections Cooling by free air convection Can be installed on DIN rail TS-35/7.5 or 15 Built in DC OK active signal LED indicator for power on 100% full load burn-in test No load power consumption <0.75W
DR-30 Series Type - AC/DC Outputs - Single Watts - 21W-30W	30W Single Output DIN Rail Power Supply Universal AC input/Full range Short circuit/Over Load/Over voltage protection Cooling by free air convection Can be installed on DIN rail TS-35/7.5 or 15 Isolation Class II LED indicator for power on 100% full load burn-in test
MDR-40 Series Type - AC/DC Outputs - Single Watts - 31W-40W	40W Miniature Single Output Industrial Din Rail PSU Universal AC input, full range Short circuit, over load, over voltage protections Cooling by free air convection Can be installed on DIN rail TS-35/7.5 or 15 Built in DC OK relay contact LED indicator for power on DC OK Relay contract 100% full load burn-in test No load power consumption <0.75W
DR-45 Series Type - AC/DC Outputs - Single Watts - 41W-50W	45W Single Output DIN Rail Power Supply Full range AC input High efficiency, low working temp. Built in EMI filter, low ripple noise Compact size, light weight Short circuit, over load, over voltage, over temperature protected Fixed switching frequency at 100KHz UL 508 approved Can be installed on DIN rail TS35/7.5 or 15
MDR-60 Series Type - AC/DC Outputs - Single Watts - 51W-60W	60W Miniature Single Output Din Rail PSU Universal AC input, full range Short circuit, over load, over voltage protections Cooling by free air convection Can be installed on DIN rail TS-35/7.5 or 15 Built in DC OK relay contact LED indicator for power on 100% full load burn-in test No load power consumption <0.75W
DR-60 Series Type - AC/DC Outputs - Single Watts - 51W-60W	60W Single Output DIN Rail Power Supply Universal AC input/Full range Short circuit/Over Load/Over voltage protection Cooling by free air convection Can be installed on DIN rail TS-35/7.5 or 15 UL 508 (industrial control equipment) approved Isolation Class II LED indicator for power on 100% full load burn-in test
DR-75 Series Type - AC/DC Outputs - Single Watts - 71W-80W	75W Single Output Din Rail Power Supply Universal AC input UL508 listed approved Can be installed on Din rail TS35/7.5 or 15 Short circuit, over load, over voltage & over temperature protections LED indicator for power on Fixed switching frequency at 50KHz Free air convection cooling 100% full load burn-in test
MDR-100 Series Type - AC/DC Outputs - Single Watts - 91W-100W	100W Miniature Single Output DIN Rail Power Supply Universal AC Input Built-in active PFC function, compliance to EN61000-3-2 Short circuit, over load, over voltage, over temperature protections Cooling by free air convection Can be installed on DIN rail TS-35/7.5 or 15 LED Indicator for power on DC OK Signal No load power consumption <1W NEC Class 2 limited power source (for 24V & 48V only) 100% full load burn-in test ZCS/ZVS technology to reduce power dissipation
DR-100 Series Type - AC/DC Outputs - Single Watts - 91W-100W	100W Single Output Class II DIN Rail Power Supply Universal AC input Short circuit, over load, over voltage, over temperature protections Cooling by free air convection Can be installed on DIN rail TS-35/7.5 or 15 Isolation class II LED indicator for power on No load power consumption<1W 100% full load burn-in test
DR-120 Series Type - AC/DC Outputs - Single Watts - 111W-120W	120W Single Output DIN RAIL Power Supply AC input range selectable by switch Installed on DIN rail TS35/7.5 or 15 Soft start circuit Limiting AC surge current Short circuit, over voltage, over load, over temperature protections 100% full load burn in LED indication for power on UL508(industrial control equipment) approved Fixed switching frequency at 55KHz
DRH-120 Series Type - AC/DC Outputs - Single Watts - 111W-120W	120W Single Output DIN Rail Power Supply Short circuit, over load, over voltage & over temperature protections Cooling by free air convection Built-in constant current limiting circuit Can be installed on DIN rail TS-35/7.5 or 15 EN61000-6-2(EN50082-2) industrial immunity level 100% full load burn-in test Fixed switching frequency at 70KHz
SDR-120 Series Type - AC/DC Outputs - Single Watts - 111W-120W	120W Single Output Din Rail Power Supply with PFC Function High efficiency 91% and low power dissipation 150% peak load capability Built-in active PFC function, PF>0.93 Short circuit, over load, over voltage, over temperature protections Cooling by free air convection Can be installed on DIN rail TS-35/7.5 or 15 UL 508 (industrial control equipment) approved EN61000-6-2(EN50082-2) industrial immunity level Built-in DC OK relay contac 100% full load burn-in test UL / CUL / TUV / CE / CB / SEMI F47 / GL Approvals
WDR-120 Series Type - AC/DC Outputs - Single Watts - 111W-120W	120W Single Output Industrial Din Rail Power Supplies Single and two phase wide input range 180~550VAC High efficiency and low power dissipation Protections: Short circuit / Overload / Over voltage / Over temperature Built-in constant current limiting circuit Cooling by free air convection Can be installed on DIN rail TS-35/7.5 or 15 UL 508(industrial control equipment)approved EN61000-6-2(EN50082-2) industrial immunity level Built-in DC OK relay contact 100% full load burn-in test
DRP-240 Series Type - AC/DC Outputs - Single Watts - 201W-250W	240W Single Output DIN RAIL Power Supply Universal AC input/Full range Built in PFC circuit Installed on DIN rail TS35/7.5 or 15 Short circuit, over voltage, over load & over temperature protections Cooling by free air convection 100% full load burn in UL 508(industrial control equipment) approved Fixed switching frequency at 100KHz LED indication for power on
WDR-240 Series Type - AC/DC Outputs - Single Watts - 201W-250W	240W Single Output Industrial Din Rail Power Supplies Single and two phase wide input range 180~550VAC High efficiency 91% and low power dissipation Protections: Short circuit / Overload / Over voltage / Over temperature Cooling by free air convection Can be installed on DIN rail TS-35/7.5 or 15 UL 508(industrial control equipment)approved EN61000-6-2(EN50082-2) industrial immunity level Built-in DC OK relay contact 100% full load burn-in test
SDR-240 Series Type - AC/DC Outputs - Single Watts - 201W-250W	240W Single Output Industrial Din Rail PSU Built-in active PFC function, PF>0.93 High efficiency 93% and low power dissipation Short circuit, over load, over voltage, over temperature protections Cooling by free air convection Built-in constant current limiting circuit Can be installed on DIN rail TS-35/7.5 or 15 UL 508(industrial control equipment)approved EN61000-6-2(EN50082-2) industrial immunity level Built-in DC OK Relay contact 100% full load burn-in test 150% peak load capability