| Input Voltage |
85 ~ 264Vac 120 ~ 370Vdc |
| Input Frequency |
47 ~ 63Hz |
| Power Factor |
PF>0.95/230Vac PF>0.99/115Vac at full load |
| Input Current |
2.3A/115Vac 1.3A/230Vac |
| Inrush Current |
35A/115Vac 65A/230Vac |
| Leakage Current |
<1mA/ 240Vac |
| Set Up, Rise Time |
1000ms, 50ms/230Vac 2500ms, 50ms/115Vac at full load |
| Hold Up Time |
16ms/230Vac 16ms/115Vac at full load |
| Over Load Protection |
105 ~ 135% rated output power |
|
Constant current limiting, recovers automatically after fault condition is removed |
| Over Voltage Protection |
Shut down o/p voltage, re-power on to recover |
| Over Temperature Protection |
95°C (3.3V ~ 7.5V), 85°C (12V ~ 48V) (TSW1 : detect on heatsink Q1 of power transistor) |
|
105°C (3.3V ~ 7.5V),100°C (12V ~ 48V) (TSW2 : detect on heatsink HS4 of power transistor) |
|
Shut down O/P voltage, recovers automatically after temperature goes down |
| Remote Control |
Short power OFF ; Open power ON |
| Working Temperature |
-30°C ~ +70°C (Refer to output load derating curve) |
| Working Humidity |
20 ~ 90% RH non-condensing |
| Storage Temperaure, Humidity |
-40°C ~ +85°C, 10 ~ 95% RH |
| Temperature Coefficient |
±0.04%/°C (0 ~ 50°C) |
| Vibration |
10 ~ 500Hz, 5G 10min./1cycle, 60min. each along X, Y, Z axes |
| Withstand Voltage |
I/P-O/P:3KVAC I/P-FG:1.5KVAC O/P-FG:0.5KVAC |
| Isolation Resistance |
I/P-O/P, I/P-FG, O/P-FG:100M Ohms / 500VDC/ 25/°C 70% RH |
| Safety Standards |
UL60950-1, TUV EN60950-1 approved |
| EMC |
Compliance to EN55022 (CISPR22) Class B; EN61000-3-2,-3; ENV50204; |
|
EN61000-4-2,3,4,5,6,8,11; EN55024; EN61000-6-2, heavy industry level, criteria A |
| MTBF |
213.4K hrs min. MIL-HDBK-217F (25°C) |
| Dimensions |
159 x 97 x 38mm |
