TS-700 Series - 700W True Sine Wave DC-AC Power Inverter
Home > Products > DC/AC Power Inverters > 700W True Sine Wave DC-AC Power Inverter
Features
- True sine wave output (THD<3%)
- High surge power up to 1400W
- High efficiency up to 91%
- Power ON-OFF switch
- Standby saving mode can be selectable
- Front panel indicator for operation status
- Built-in fan ON-OFF control function
- Bat. low alarm / Bat. low shutdown / Over voltage / Over temp./ Output short / Reverse polarity / Overload protections
- Application : Home appliance, power tools, office and portable equipment, vehicle and yacht ...etc.
Applications
- Home appliances
- Power tools
- Office equipment
- Portable equipment
- in vehicles, yachts, mobile homes or places with unstable/unreliable utilities
Description
TS-700 Series are high performance DC/AC power inverters released to cover lower wattage applications. Uising high frequency circuit topology this true sine wave inverter has efficiency up to 91%. Capabile of providing 700W continously as well as a peak load of 800W for 3 minutes, 1050W for 10 seconds or 1400W surge power for 30 utility cycles. The output AC voltage and frequency of TS-700 can be easily adjusted via the front panel, as can the standby saving mode function. TS-700 is suitable for powering all kinds of home appliances, power tools, and office & portable equipment in vehicles, yachts, mobile homes or places that the utility can’t be reached or the power quality is poor.
Specification
| OUTPUT |
|
| Rated Power |
700W |
| Max. Output Power |
800W for 180 sec. / 1050W for 10 sec./ surge power 1400W for 30 cycles |
| AC Voltage |
Factory setting set at 230VAC
200 / 220 / 230 / 240VAC selectable by setting button S.W |
| Frequency |
50±0.1Hz 50/60Hz selectable by setting button S.W |
| Waveform |
True sine wave (THD<3%) at rated input voltage |
| AC Regulation |
±3.0% |
| Saving Mode |
Load <5W will be changed to standby mode |
| Front Panel Indicator |
Battery voltage level, output load level, saving mode, fault and operation status |
| *************************** |
|
| INPUT |
|
| No Load Dissipation |
<6W @ standby saving mode |
| Off Mode Current Draw |
<1mA |
| Battery Types |
Open & sealed Lead Acid |
| Input Bat. Polarity Protection |
By internal fuse open |
| *************************** |
|
| Over Temperature Protection |
75°C ±5°C |
|
Shut down o/p voltage, re-power on to recover; by internal RTH3 detect on heatsink of power diode |
| Output Short Protection |
Shut down o/p voltage, re-power on to recover |
| Over Load Protection |
105 ~ 115% load for 180 sec., 115% ~ 150% load for 10 sec. |
|
Shut down o/p voltage, re-power on to recover |
| GFCI Protection |
None |
| Working Temperature |
0 ~ +40°C @ 100% load ; +60°C @ 50% load |
| Working Humidity |
20% ~ 90% RH non-condensing |
| Storage Temperature, Humidity |
-30°C ~ +70°C / -22 ~ +158°F, 10 ~ 95% RH |
| Vibration |
10 ~ 500Hz, 3G 10min./1cycle, 60min. each along X, Y, Z axes |
| Safety Standards |
EN60950-1 |
| Withstand Voltage |
Bat I/P-AC O/P: 3.0KVAC AC O/P- FG: 1.5KVAC |
| Isolation Resistance |
Bat I/P-AC O/P, Bat I/P-FG:100M Ohms / 500VDC / 25°C / 70% RH |
| EMI Conduction & Radiation |
Compliance to EN55022 class A, 72/ 245/ CEE, 95/ 54/ CE, E-Mark |
| EMS Immunity |
Compliance to EN61000-4-2,3,8 ENV50204 |
TS-700 Series Specifications
Items
TS-700 Series Specifications
| Part No | Input Bat. Voltage | Input Voltage Range | Input DC Current | Eff. | Fuse | Bat. Low Alarm | Bat. Low Shutdown |
|
TS-700-212D
| 12V | 10.5 ~ 15VDC | 75A | 89% | 40A | 11.3±4% | 10.5±4% |
|
TS-700-224D
| 24V | 21 ~ 30VDC | 38A | 90% | 30A | 22.5±4% | 21±4% |
|
TS-700-248D
| 48V | 42 ~ 60VDC | 19A | 91% | 20A | 45±4% | 42±4% |
(663 KB)
.jpg)
