MEAN WELL Products

HomeMEAN WELL ProductsDC/AC Power InvertersTS-1000 Series 1000W True Sine Wave DC-AC Power Inverter

TS-1000 Series - TS-1000 Series 1000W True Sine Wave DC-AC Power Inverter

1000W True Sine Wave DC-AC Power Inverter

Email
SKU: TS-1000 Series Category:

Description

TS-1000 is a high performance true sine wave DC/AC power inverter that uses high frequency circuit topology. With high efficiency up to 92% this dc/ac inverter can provide 1000W continuously and peak load of 1150W for 3 minutes, 1500W for 10 seconds or 2000W surge power for 30 utility cycles.

Additional information

Standards

CE

Type

DC/AC,Power Inverter,True Sine Wave

Range Power

Outputs

Single

OUTPUT
Rated Power 1000W
Maximum Output Power 1150W for 180 sec./1500W for 10 sec./surge power 2000W for 30 cycles
AC Voltage 200/220/230/240VAC selectable by setting button
Frequency 50±0.1%Hz 50/60Hz selectable by setting button S.W
Waveform tRUE SINE WAVE (thd<3%) at rated input voltage
AC Regulation ±3.0%
Saving Mode Load <5W will be changed to standby mode
Front Panel Indicator Battery voltage level, output load level, saving mode, fault and operation status
***************************
INPUT See table below for model specifics
No Load Dissipation <6W @ standby saving mode
Off Mode Current Draw <1mA
Battery Types Open & sealed lead acid
Input Bat. Polarity Protection By internal fuse open
***************************
Over Temperature Protection 65°C ±5°C
Shut down o/p voltage, re-power on to recover;
by internal RTH3 detect on heatsink of power transistor
Output Short Protection Shut down o/p voltage, re-power on to recover
Over Load Protection 105 ~ 115% load for 180 sec., 115% ~ 150% load for 10 sec.
Shut down o/p voltage, re-power on to recover
GFCI Protection None
Working Temperature 0°C ~ 40°C @ 100% load
Working Humidity 20% ~ 90% RH non-condensing
Storage Temperature, Humidity -30°C ~ +70°C/-22°F ~ +158°F, 10 ~ 95% RH
Vibration 10 ~ 500Hx, 5G 10min./1 cycle, 60 min. each along X, Y, X axes
Withstand Voltage Bat I/P-AC O/P:3.0KVAC AC O/P – FG:1.5KVAC
Isolation Resistance Bat I/P-AC O/P, Bat I/P-FG:100M Ohms/500VDC
Safety Standards EN60950-1
EMC Compliance to EN55022 Class A, 72/245/ CEE, 95/54/ CE, E-Mark,
EN61000-4-2, 3, 8; ENV50204
  • CE