1000W True Sine Wave DC-AC Power Inverter

Description

TS-1000 is a high-performance true sine wave DC/AC power inverter that uses high-frequency circuit topology. With high efficiency up to 92% this dc/ac inverter can provide 1000W continuously and peak load of 1150W for 3 minutes, 1500W for 10 seconds or 2000W surge power for 30 utility cycles.

Additional information

Standards	CE, CUL, E13
Type	DC/AC
Outputs	Single

True sine wave output (THD<3%)
High surge power up to 2000W
High efficiency up to 92%
Power ON-OFF switch
Standby saving mode can be selected
Front panel indicator for operation status
Thermostatically controlled cooling fan
Battery low alarm, battery low shutdown, over voltage, over temperature, output short, input polarity reverse, over load protections
Built in cooling fan ON-OFF control
Optional monitoring software
Output AC voltage selectable by setting button
100 ~ 120VAC Output version available
Worldwide AC output receptacle options available

Home appliances
power tools
office equipment
portable equipment
vehicles
yachts

OUTPUT
Rated Power	1000W
Maximum Output Power	1150W for 180 sec./1500W for 10 sec./surge power 2000W for 30 cycles
AC Voltage	200/220/230/240VAC selectable by setting button
Frequency	50±0.1%Hz 50/60Hz selectable by setting button S.W
Waveform	tRUE SINE WAVE (thd<3%) at rated input voltage
AC Regulation	±3.0%
Saving Mode	Load <5W will be changed to standby mode
Front Panel Indicator	Battery voltage level, output load level, saving mode, fault and operation status
***************************
INPUT	See table below for model specifics
No Load Dissipation	<6W @ standby saving mode
Off Mode Current Draw	<1mA
Battery Types	Open & sealed lead acid
Input Bat. Polarity Protection	By internal fuse open
***************************
Over Temperature Protection	65°C ±5°C
	Shut down o/p voltage, re-power on to recover;
	by internal RTH3 detect on heatsink of power transistor
Output Short Protection	Shut down o/p voltage, re-power on to recover
Over Load Protection	105 ~ 115% load for 180 sec., 115% ~ 150% load for 10 sec.
	Shut down o/p voltage, re-power on to recover
GFCI Protection	None
Working Temperature	0°C ~ 40°C @ 100% load
Working Humidity	20% ~ 90% RH non-condensing
Storage Temperature, Humidity	-30°C ~ +70°C/-22°F ~ +158°F, 10 ~ 95% RH
Vibration	10 ~ 500Hx, 5G 10min./1 cycle, 60 min. each along X, Y, X axes
Withstand Voltage	Bat I/P-AC O/P:3.0KVAC AC O/P – FG:1.5KVAC
Isolation Resistance	Bat I/P-AC O/P, Bat I/P-FG:100M Ohms/500VDC
Safety Standards	EN60950-1
EMC	Compliance to EN55022 Class A, 72/245/ CEE, 95/54/ CE, E-Mark,
	EN61000-4-2, 3, 8; ENV50204

Part No	Input Bat. Voltage	Input Volt. Range	Input DC Current	Eff.	Fuse Protection	Bat. Low Alarm	Bat. Low Shutdown
TS-1000-212D	12V	10.5 ~ 15VDC	100A	90%	40A*2	11.3±4%	10.5±4%
TS-1000-224D	24V	21 ~ 30VDC	50A	91%	40A*2	22.5±4%	21±4%
TS-1000-248D	48V	42 ~ 60VDC	25A	92%	20A*2	45±4%	42±4%