Meanwell Products

HomeMeanwell ProductsOpen Frame Switching Power Supply150W Single Output PFC Open Frame PSU

ASP-150 Series - 150W Single Output PFC Open Frame PSU

Email

Description

ASP-150 is a 150W open frame type switching power supply (mainly AS-120P removed from the plastic case)and a new addition to our AC/DC product line. Featuring low no load power consumption and built-in active PFC function the units has been designed based ont he energy saving concern that is critical to consumer electronic applications. Thanks to the leading edge ZCS/ZVS technology the efficiency is as high as 90% and hence can provide 150W by only free air convection. ASP-150 mainly targets general industrial applications with space contraints as its 28.5mm low profile will fit prefectly in any 1U equipment.

Additional information

Standards

CB, CE, CSUUS, PFC

Type

AC/DC

Outputs

Single

  • Universal AC input/Full range
  • Built-in active PFC function, PF>0.95
  • Short circuit, over load, over voltage & over temperature protections
  • Cooling by free air convection
  • ZCS/ZVS technology to reduce power dissipation
  • High power density 8.5W/in³
  • No load power consumption <1W at 240VAC
  • 100% full burn in test
  • cUL, CB & CE Approvals
  • Industrial equipment
Input Voltage90 ~ 264VAC 127 ~ 370VDC
Input Frequency47 ~ 63Hz
Power FactorPF >0.95/230VAC PF >0.98/115VAC at full load typically
AC Current2A/115VAC 1A/230VAC
Inrush Current80A/230VAC
Leakage Current<2mA / 240VAC
Setup, Rise Time3000ms, 80ms at full load
Hold Up Time50ms/230VAC 16ms/115VAC at full load typically
Over Load Protection105 ~ 135% rated output power
Hiccup mode, recovers automatically after fault condition is removed
Over Voltage ProtectionShut down o/p voltage, re-power on to recover
Over Temperature Protection90°C ±15°C (RTH2) Detect on heatsink of power transistor
Shut down o/p voltage, re-power on to recover
Working Temperature-20°C ~ + 60°C with cooling fan (Refer to output load derating curve)
Working Humidity20% ~ 90% RH non-condensing
Storage Temperature, Humidity-20°C ~ +85°C , 10 ~ 95% RH
Temp. Coefficient±0.05% /°C (0 ~ 50°C)
Vibration10 ~ 500Hz, 2G 10min./1cycle, period for 60min. each along X, Y, Z axes
Safety StandardsUL60950-1, CB (IEC60950-1) Approved
Withstand VoltageI/P-O/P:4.25KVDC I/P-FG:1.5KVAC O/P-FG:0.5KVAC
Isolation ResistanceI/P-O/P, I/P-FG, O/P-FG:100M Ohms/500VDC
EMCCompliance to EN55022 (CISPR22) Class B, EN61000-3-2,3
EN61000-4-2,3,4,5,6,8,11, ENV205204 Light industry level, criteria A
MTBF149.3Khrs min. MIL-HDBK-217F (25°C)
  • CB
  • CE
  • CSUUS
  • PFC