MEAN WELL Products

HomeMEAN WELL ProductsOpen Frame Switching Power Supply20W Single Output Open Frame Power Supply

OFM-0200 Series - 20W Single Output Open Frame Power Supply

Email
SKU: OFM-0200 Series Category:

Additional information

Standards

CE, CSUUS, TUV

Type

AC/DC

  • Universal AC input/ full range
  • Protections: Short circuit/ over load/ over voltage/ Over temperature
  • Ultra-miniature size, light weight
  • Cooling by free air convection
  • 100% full load burn-in test
  • Fixed switching frequency at 100KHz
  • Low cost
  • High reliability
Input voltage85~264VAC 120~370VDC
Input frequency47-440Hz
AC current (typ.)0.48A/115VAC 0.32A/230VAC
Inrush currentCold start 22A/115V 41A/230V
Leakage current<3.5mA/240VAC
Voltage tolerance±2.0%
Setup, rise time300ms, 160ms/230VAC 300ms, 160ms/115VAC at full load
Hold time (typ.)80ms/230VAC 20ms/115VAC at full load
Overload protectionAbove 150% rated output power
Protection type: Hiccup mode, recovers automatically after fault condition is removed
Over voltage protectionProtection type: Shut down o/p voltage, re-power on to recover
Over temperature protectionTj 145°C typically (U1) Detect on main control IC
Protection type: Shut down o/p voltage, recovers automatically after temperature goes down
Working temperature-10~+60°C (refer to output load derating curve)
Working humidity20 ~ 90% RH non-condensing
Storage temp., humidity-20 ~+85°C, 10 ~ 95% RH
Temp. coefficient±0.03%/°C (0~50°C)
Vibration10 ~ 500Hz, 2G 10min./1cycle, Period for 60min.each along X,Y,Z axes
MTBF476.7Khrs min. MIl-HDBK-217F (25°C)
Safety standardUL1950, TUV EN60950 approved
Withstand voltageI/P-O/P:3.0KVAC
Isolation resistanceI/P-O/P:100M Ohms/500VDC
EMI conduction & radiationCompliance to EN50081-1, EN50082-1
  • CE
  • CSUUS
  • TUV