MEAN WELL Products
SDM30 Series - 30W Single Output DC-DC Converter
Additional information
| Standards | TUV |
|---|---|
| Type | DC/DC |
| Outputs | Single |
- Wide 2:1 DC input range
- In/Out capacitance 1000pF
- Protections: Short circuit/Over load/Over voltage
- 1000VDC I/O isolation for D/D
- Cooling by free air convection
- Built-in remote ON/OFF control
- 100% full load burn-in test
- Fixed switching frequency at 225KHz
- High reliability/low cost
| Rated DC input | 12S: 12VDC 24S:24VDC 48S:48VDC |
| Input voltage range | 12S:9.2 ~ 18VDC 24S: 18 ~ 36VDC 48S:36 ~ 72VDC |
| Input DC current | 12S:3.6A 24S:2A 48S:1A |
| Idle current | 12S:35mA 24S/48S:30mA |
| Line regulation | ±1.0% |
| Load regulation | ±1.0% |
| Overload protection | Above 105% rated output power |
| Protection type: Over power limiting, recovers automatically after fault condition is removed | |
| Over voltage protection | Protection type: Shutdown o/p voltage, re-power on to recover |
| Short circuit protection | Protection type: Constant current limiting, recovers automatically after fault condition is removed |
| ON/OFF control | Logic |
| Working temp. | -25°C~+85°C (refer to output load derating curve) |
| Storage temp., humidity | -25°C~+85°C, 0 ~ 95% RH |
| Temp. coefficient | ±0.03% / °C (0~50°C) |
| Safety standards | Design refer to UL1950, TUV EN60950 |
| Isolation voltage | I/P-O/P: 1KVDC |
| Isolation resistance | I/P-O/P: 100M Ohms/500VDC |
| EMI conduction & radiation | Compliance to FCC Part15J |
| MTBF | 322.4K hrs min. MIL-HDBK-217F (25°C) |
- TUV
