MEAN WELL Products
Additional information
| Standards | CE |
|---|---|
| Type | DC/DC |
| Outputs | Single |
- 2:1 wide input range
- Protections:Short circuit/Over load/Over voltage
- 1500VDC I/O isolation
- Built in EMI filter, low ripple noise
- 100% full load burn-in test
- Fixed switching frequency at 83KHz
- Low cost, high reliability
| Voltage range | A: 9.2 ~ 18VDC B: 19 ~ 36VDC C: 36 ~ 72VDC |
| DC current | 5V: 3.2A/12V 12V:1.6A/24V 24V:0.8A/48V |
| Setup, rise, hold time | 2.5s, 50ms, ----- at full load |
| Over load protection | 105% ~ 150% rated output power |
| Protection type: Fold back current limiting, recovers automatically after fault condition is removed | |
| Over voltage protection | 5V: 5.75~6.75V/10% load, 12V: 16.8~20V/10% load, 24V: 31.5~37.5V/10% load |
| Protection type: Hiccup mode, recovers automatically after fault is removed | |
| Working temp | -10~+60°C (refer to output load derating curve) |
| Working humidity | 20 ~ 90% RH non-condensing |
| Storage temp., humidity | -20 ~+85°C, 10 ~ 95% RH |
| Temp. coefficient | ±0.03% /°C (0 ~ 50°C) |
| Vibration | 10 ~ 500Hz, 2G 10min./1 cycle, 60 min. each along X, Y, Z axes |
| MTBF | A: 374.3K hrs min. B: 365.9K hrs min. C: 377.5K hrs min. MIL-HDBK-217F (25°C) |
| Safety standards | Design refer to LVD |
| Withstand voltage | I/P-O/P:1.5KVAC, I/P-FG:1.5KVAC, O/P-FG:0.5KVAC |
| Isolation resistance | I/P-O/P, I/P-FG, O/P-FG:100M Ohms/500VDC |
| EMI conduction & radiation | Compliance to EN55022 (CISPR22) Class B |
| EMS immunity | Compliance to EN61000-4-2,3,4,6,8; ENV50204, EN55024, Heavy industry level, Criteria A |
- CE
