MEAN WELL Products
Description
GS12E Series is a 10W~12W single output AC-DC adapter that complies with Energy Star regulations & US California Energy law (CEC level IV)requirements. GS12E Series are wall mounted EUROPEAN green power adapters with low no power consumption and up to 80% high efficiency making the design ideal for energy saving and environmental concerned applications.
Additional information
| Standards | CB, CE, TRIGS |
|---|---|
| Type | AC/DC |
| Outputs | Single |
- Universal AC input / Full range
- No load power consumption< 0.3W/240VAC
- Pass energy star level IV for full series
- Meet EISA 2007 (Energy Independence and Security Act)
- 2 pole EURO plug
- Class II power (without earth pin)
- Short circuit, over load, over voltage, over temperature protections
- Fully enclosed plastic case
- Approvals: TUV / CB / CE
- Pass LPS for full series
- Consumer electronics,
- Communication industry
- Industrial devices
- IT equipment
| Input Voltage | 90 ~ 264Vac 135 ~ 370Vdc |
| Input Frequency | 47 ~ 63Hz |
| Input Current | 0.31A/115Vac 0.16A/230Vac |
| Inrush Current | 25A/ 115Vac 45A/ 230Vac, cold start |
| Leakage Current | 0.25mA/ 240Vac |
| Set Up, Rise, Hold Up Time | 500ms, 20ms, 30ms/230Vac 500ms, 20ms, 10ms/115Vac at full load |
| Over Load Protection | >105% rated output power |
| Hiccup mode, recovers automatically after fault condition is removed | |
| Over Voltage Protection | 115% ~ 135% |
| Clamp by zener diode | |
| Over Temperature Protection | U1 Tj 140°C typically (U1) Detect on main control IC |
| Shut down o/p voltage, recovers automatically after temperature goes down | |
| Working Temperature | 0°C ~ +50°C (Refer to output load derating curve) |
| Working Humidity | 20% ~ 90% RH non-condensing |
| Storage Temperature, Humidity | -20°C ~ +85°C, 10 ~ 95% RH |
| Temperature Coefficient | ±0.03% /°C (0°C ~ 40°C ) |
| Vibration | 10 ~ 500Hz, 2G 10min./1cycle, period for 60min. each along X, Y, Z axes |
| Withstand Voltage | I/P-O/P:3KVAC |
| Isolation Resistance | I/P-O/P:100M Ohms / 500VDC/ 25/°C 70% RH |
| Safety Standards | TUV EN60950 -1 approved |
| EMC | Compliance to FCC part15 class B, EN55022, EN61204-3 class B; EN61000-3-2,3; |
| EN61000-4-2,3,4,5,6,8,11, ENV50204, EN61204-3, light industry level, criteria A | |
| MTBF | 1414.6Khrs min. MIL-HDBK-217F (25°C ) |
| DC Plug | Standard type P1I: 2.1x5.5x9.5mm turning fork type, center positive for stock |
| Other type available by customer request | |
| DC Cable | Standard type UL1185 6ft (4FT only for 5V output) for stock; |
| Other type available by customer request |
- CB
- CE
- TRIGS
