MPS-200 Series are 200W PCB type switching power supplies with active PFC function. Complying with both medical and industrial agency standards these units can deliver their full rated output of 200W with 25CFM forced are or 140W with convection cooling for either medical or industrial applications. Featuring only 180uA of leakage current at 264VAC, they can be equipped into non-patient contact medical equipment and still comply with Class B EMI regulations. Standard functions include short circuit, over load, over voltage and over temperature protections, PG/PF signal output, remote sense and remote ON/OFF control that cover most of the demands for typicall usages. Since the height is only 35.5mm the MPS-200 series are also suitable for 1U applications or other height constraint applications.
CB, CE, CSUUS, MEDICAL, PFC, TUVMedical
Universal AC input / Full range
Built-in active PFC, PF>0.95@230VAC
Low leakage current <180µA
Free air convection for 140W and forced air convection for 200W
Power good and fail signal output
Built-in remote ON-OFF control & remote sense function
Fixed switching frequency at 100KHz
Compliance to UL2601-1 & TUV EN60601-1 medical standards
Non-patient contact medical
Low Profile IT
90~264 VAC, 47~440Hz / 127~370VDC.
PF>0.95/230VAC PF>0.98/115VAC, full load
AC Input Current
3.5A at 115VAC, 60Hz or 1.6A at 230VAC, 60Hz full load.
<25A at 115VAC or <40A at 230VAC Cold start
Setup, Rise Time
1000ms, 20ms / 230VAC at full load , 3000ms, 20ms / 115VAC at full load
16ms / 230VAC at full load, 16ms / 115VAC at full load
<180µA at 264VAC for earth leakage
<100µA at 264VAC for patient leakage
DC Output ADJ Range
-5% to +10% rated output, on first output
Over Load Protection
120~160% rated load
Auto recovery once fault condition removed
Over Voltage Protection
115%~135% rated load, on first output
Over Temperature Protection
At 95°C. Will shut down and recover automatically after temperature goes down.
Power Good/Fail Signal
TTL logic high for power good and TTL low for power fail.
RC+/RC-:0 ~ 0.8V=power on; 4 ~ 10V=power off sink current<4~10mA
-20°C to 70°C (refer to derating curve)
20~90% RH non-condensing.
Storage Temp , Humidity
-40°C to +85°C, 10~90% RH
±0.04%/°C (0~50°C) full load
2G 10Hz ~500Hz 10 min cycle.
Medical Safety Standards
UL60601-1, TUV EN60601-1 approved
Commercial Safety Standards
Complies with UL60950-1, TUV EN60950-1
I/P-O/P: 4000VAC I/P-FG, O/P-FG: 1500VAC
I/P-O/P, I/P-FG, O/P-FG : >100M Ohms
Compliance to EN55011 Class B, EN55022 Class B, EN61000-3-2, EN61000-3-3
Compliance to EN61000-4-2 Level 3, 8KV, EN61000-4-2 Level 2, 4KV