Meanwell Products

HomeMeanwell ProductsExternal Battery Charger300W PFC Single Output Battery Charger

PB-300P Series - 300W PFC Single Output Battery Charger

Email

Description

Designed for lead-acid batteries featuring 3 stage charging characteristics and the automated derating capability for charging current under high ambient temperatures, these intelligent chargers will quickly and efficiently feed your hungry batteries and ensure the lifetime of them at the same time. With the passive PFC function, PB-300 can comply with the harmonic requirements of EN61000-3-2 & equipped with an IEC320 C14 AC Inlet and ON/OFF switch this unit is very convenient for both household and general consumer use. The 48.5mm low profile design also solves a lot of installation troubles and space issues.

Additional information

Manufacturer

Mean Well Enterprises Ltd.

Standards

CB, CE

Battery type

Lead Acid

  • 3 stage charging
  • AC 115/230VAC selected by switch
  • Built-in passive PFC function compliance to EN61000-3-2 Class A (option)
  • Protection:Reverse Polarity/Short circuit/Over voltage/Over temperature
  • Cooling by free air convection
  • Charger for lead-acid batteries
  • 2 color LED loading indicator
  • Low cost, High reliability
  • Household appliances
  • Leisure vehicles
  • Marine applications
Input Voltage 90 to 132VAC / 180 to 264VAC selected by switch
Input Frequency 47 to 63Hz
Power Factor >0.65 typically at 230VAC
AC Current 6A/115VAC 3A/230VAC
Inrush Current 60A cold start
Leakage Current <3.5mA / 240VAC
Battery Type Open & Sealed Lead Acid
Over Load Protection 90 to 110% rated output current
Constant current limiting, recovers automatically after fault condition is removed
Reverse Polarity Portection By internal fuse
Over Temperature Protection Automatically derate charge current until zero
Working Temperature -10°C to +40°C (Refer to output load derating curve)
Working Humidity 20% to 90% RH non-condensing
Storage Temperature, Humidity -40°C to +85°C, 10% to 95% RH
Temperature Coefficient ±0.05%/°C (0°C to 45°C)
Vibration 10 to 500Hz, 2G 10min./1cycle, 60min. each along X, Y, Z axes
Safety Standards EN60335-2-29 CB Approved by TUV
Withstand Voltage I/P-O/P:3KVAC I/P-FG:1.5KVAC O/P-FG:0.5KVAC
Isolation Resistance I/P-O/P, I/P-FG, O/P-FG:100M Ohms/500VDC
EMC Compliance to EN55022 (CISPR22) Class B, EN61000-3-2,-3
EN61000-4-2,3,4,5,6,8,11; ENV50204, EN55024, Light industry level, criteria A
MTBF 115.8Khrs minimum. MIL-HDBK-217F (25°C)
  • CB
  • CE