Meanwell Products

HomeMeanwell ProductsMedical Power Supply160W Triple Output Open Frame Medical Power Supply

RPT-160 Series - 160W Triple Output Open Frame Medical Power Supply



RPT-160 Series is a triple output power supply that can fulfill the requirements of general medical or industrial applications while the green RPTG-160, with additional PS-ON control, 5V/0.8A standby output and 0.75W of no-load-power-consumption can be implemented into all kinds of end systems.

Additional information







  • Universal AC input
  • Built-in active PFC function
  • Short circuit, over load, over voltage, over temperature protections
  • 5"x3" compact size
  • Free air convection for 100W and 145W with 20.5 CFM forced air
  • With power good and fail signal output
  • Built-in remote sense function for 5~15V
  • No load power consumption under 0.75W by PS-ON control (Optional)
  • Standby 5V@0.8A with Fan/0.6A without Fan (Optional)
  • Approval: UL / CUL / TUV / CE / CB
  • Medical applications
  • IT applications
Input Voltage90 ~ 264Vac 127 ~ 370Vdc
Input Frequency47 ~ 63Hz
Power FactorPF>0.93/230Vac PF>0.98/115Vac at full load
Input Current1.8A/115Vac 0.9A/230Vac
Inrush Current35A/115Vac 70A/230Vac, cold start
Leakage CurrentEarth leakage current <300uA/ 264Vac, Patient leakage current <100uA/264Vac
Set Up, Rise Time1200ms, 30ms/230Vac 2500ms, 30ms/115Vac at full load
Hold Up Time16ms/230Vac/115Vac at full load
Voltage Adjustment Range5 ~ 5.5V, CH1 output only
Over Load Protection105 ~ 135% rated output power
Hiccup mode, recovers automatically after fault condition is removed
Over Voltage Protection5.75 ~ 6.75V, CH1 output only
Shut down o/p voltage, re-power on to recover
Over Temperature Protection105°C (TSW1) detect on heatsink of power transistor
90°C (TSW2) detect on heatsink of power transistor
(TSW1)Shut down o/p voltage, recovers automatically after temperature goes down
(TSW2)Shut down o/p voltage, re-power on to recover
5V Standby5VSB : 5V@0.6A without Fan, 0.8Awith Fan 20.5CFM ; tolerance ±2%, ripple : 50mVp-p(max.)
PS-ON Input Signal (Optional)Power on: PS-ON = Hi or >2V; Power off : PS-ON = Low or <0.5V
Power Good/Power Fail500ms>PG>10ms PF>1ms
Working Temperature-20°C ~ +70°C (Refer to output load derating curve)
Working Humidity20 ~ 90% RH non-condensing
Storage Temperature, Humidity-40°C ~ +85°C, 10 ~ 95% RH
Temperature Coefficient±0.03%/°C (0 ~ 50°C)
Vibration10 ~ 500Hz, 2G 10min./1cycle, 60min. each along X, Y, Z axes
Withstand VoltageI/P-O/P:4KVAC I/P-FG:1.5KVAC O/P-FG:0.5KVAC
Isolation ResistanceI/P-O/P, I/P-FG, O/P-FG:100M Ohms / 500VDC/ 25/°C 70% RH
Safety StandardsUL60601-1, TUV EN60601-1 approved
EMCCompliance to EN55011 (CISPR11), EN55022 (CISPR22) Class B; EN61000-3-2,-3; ENV50204;
EN61000-4-2,3,4,5,6,8,11; EN55024, EN60601-1-2, EN61204-3, medical level, Criteria A
MTBF191.4Khrs min. MIL-HDBK-217F (25°C)
Dimensions127 x 76.2 x 34.6mm
  • CB
  • CE
  • PFC
  • TUVMedical