Meanwell Products

HomeMeanwell ProductsExternal Battery Charger230W Single Output External Battery Charger

PB-230 Series - 230W Single Output External Battery Charger


Additional information








160Ah Maximum

Battery type

Lead Acid

  • 3 Stage charging characteristic
  • Universal AC input
  • Built-in active PFC Function
  • Short Circuit, Over Load, Over Voltage Protections
  • Built-in cooling fan ON-OFF control
  • Built-in remote ON-OFF control
  • 2 colour LED loading indicator
  • Low cost, high reliability
Input Voltage 90 ~ 264Vac
Input Frequency 47 ~ 63Hz
Power Factor PF>0.95/230vAC pfc>0.98/115Vac at full load
AC Current 3A/115Vac 1.5A/230Vac
Inrush Current 50A, cold start
Leakage Current <3.5mA/240Vac
Battery Type Open & Sealed Lead Acid
Over Load Protection 90 ~ 110% rated output current
Constant current limiting, recovers automatically after fault condition is removed
Over Voltage Protection Shut down o/p voltage, re-power on to recover
Over Temperature Automatically derate charge current until zero
Remote Control (CN105) Open: Normal operation Short: Stop charging
Fan Control RTH3>50°C Fan ON, <45°C Fan OFF (Typ.)
Temperature Rise By NTC
Working Temperature -20°C ~ +50°C (Refer to output load derating curve)
Working Humidity 20 ~ 90% RH non-condensing
Storage Temperature, Humidity -40°C ~ +85°C, 10 ~ 95% RH
Temperature Coefficient ±0.03%/°C (0 ~ 50°C)
Vibration 10~500Hz, 2G 10min./1 cycle, 60min. each along X, Y, Z axes
Safety Standards UL1012 (for PB-230-xxAD1 only), TUV EN60950-1 approved
Withstand Voltage I/P-O/P:3KVAC I/P-FG:1.5KVAC O/P-FG:0.5KVAC
Isolation Resistance I/P-O/P, I/P-FG, O/P-FG:100M Ohms / 500VDC / 25°C / 70% RH
EMC Compliance to EN55022 (CISPR22) Class B, EN61000-3-2,-3; ENV50204
EN61000-4-2,3,4,5,6,8,11; EN55024, light industry level, criteria A
MTBF 244.5Khrs min. MIL-HDBK-217F (25°C)
Plug Standard = 4 pin power din AD1=Anderson Connector
DC Cable 115cm ±5cm
  • CE
  • PFC
  • ULR