Meanwell Products

HomeMeanwell ProductsEnclosed Switching Power Supply600W Single Output & 5Vsb AC-DC PFC Power Supply

HRPG-600 Series - 600W Single Output & 5Vsb AC-DC PFC Power Supply

Email

Description

HRPG-600 Series are 600W AC/DC enclosed type power supplies with PFC function that fulfil the requirement of EN61000-3-2 for harmonic current with high operating efficiency and low no-load power consumption. Other standard functions of HRPG-600 include 300VAC input surge immunity for 5 seconds, remote sense, DC OK signal, LED indicator, heavy industry level of EMS immunity(EN61000-6-2), and protection for short-circuiting, overload (constant current limiting), over voltage, and over temperature. HRPG-600 Series are different to the HPR-600’s as they have additional remote ON/OFF control and 5V/0.3A standby output.

Additional information

Manufacturer

Mean Well Enterprises Ltd.

Standards

CB, CE, CSUUS, PFC, TUV

Type

AC/DC

Outputs

Single

  • Universal AC input
  • Built-in active PFC function, PF>0.95
  • High efficiency up to 89% (typ.)
  • Short circuit, over load, over voltage, over temperature protections
  • Withstand 300VAC surge input for 5 seconds
  • Built-in cooling Fan ON-OFF control (load)
  • DC OK signal output
  • Stand by 5V@0.3A
  • Built in remote ON-OFF control
  • Built-in remote sense function
  • No load power consumption <0.75W
  • General electronics
  • Factory automation
  • Moving signs
  • Test and measurement equipment
Input Voltage 85 ~ 264Vac 120 ~ 370Vdc
Input Frequency 47 ~ 63Hz
Power Factor PF>0.95/230Vac PF>0.99/115Vac at full load
Input Current 8.5A/115Vac 5A/230Vac
Inrush Current 35A/115Vac 70A/230Vac
Leakage Current <1mA/ 240Vac
Set Up, Rise Time 1000ms, 50ms/230Vac 2500ms, 50ms/115Vac at full load
Hold Up Time 16ms/230Vac 16ms/115Vac at full load 13ms/115Vac at full load for 5V,7.5V
Over Load Protection 105 ~ 135% rated output power
Constant current limiting, recovers automatically after fault condition is removed
Over Voltage Protection Shut down o/p voltage, re-power on to recover
Over Temperature Protection 80°C ±5°C (75°C ±5°C 5V only) (TSW1 : detect on heatsink of power transistor)
90°C ±5°C (TSW2 : detect on heatsink of power doide for 3.3V,5V,7.5V
100°C ±5°C (TSW2) detect on main power output choke for others
Shut down O/P voltage, recovers automatically after temperature goes down
5V Standby 5VSB : 5V@0.3A ; tolerance ±5%, ripple : 50mVp-p(max.)
DC OK Signal PSU turn on : 3.3 ~ 5.6V ; PSU turn off : 0 ~ 1V
Remote Control RC+ / RC-: 4 ~ 10V or open = power on ; 0 ~ 0.8V or short = power off
Working Temperature -30°C ~ +70°C (Refer to output load derating curve)
Working Humidity 20 ~ 90% RH non-condensing
Storage Temperaure, Humidity -40°C ~ +85°C, 10 ~ 95% RH
Temperature Coefficient ±0.03%/°C (0 ~ 50°C)
Vibration 10 ~ 500Hz, 5G 10min./1cycle, 60min. each along X, Y, Z axes
Withstand Voltage I/P-O/P:3KVAC I/P-FG:1.5KVAC O/P-FG:0.5KVAC
Isolation Resistance I/P-O/P, I/P-FG, O/P-FG:100M Ohms / 500VDC/ 25/°C 70% RH
Safety Standards UL60950-1, TUV EN60950-1 approved
EMC Compliance to EN55022 (CISPR22) Class B; EN61000-3-2,-3; ENV50204;
EN61000-4-2,3,4,5,6,8,11; EN55024; EN61000-6-2, heavy industry level, criteria A
MTBF 147.7K hrs min. MIL-HDBK-217F (25°C)
Dimensions 218 x 105 x 63.5mm
  • CB
  • CE
  • CSUUS
  • PFC
  • TUV