MEAN WELL Products

HomeMEAN WELL ProductsExternal Battery Charger220W AC-DC Single Output External Battery Charger

GC220 Series - 220W AC-DC Single Output External Battery Charger



GC220 Series are a range of 220W Class I power 2 stage battery chargers with built in active PFC function. Featuring low no load power consumption and high efficiency, up to 93% these battery chargers fulfil the energy saving and environmental requirements of many new builds.

Additional information




200Ah Maximum

Battery type

Lead Acid

  • 2 stage charging characteristic
  • Universal AC input / Full range
  • Built-in active PFC function, PF>0.91
  • No load power consumption <1W
  • 3 pole AC inlet IEC320-C14
  • Class I power ( with earth pin)
  • Short circuit, over load, over voltage, over temperature protections
  • Fully enclosed plastic case
  • 2 colour LED indicator for charge status
  • Approvals: UL / CUL / TUV / CB / FCC / CE
Input Voltage 90 ~ 264VAC 127 ~ 370VDC
Input Frequency 47 ~ 63Hz
Power Factor PF>0.91 / 230VAC PF>0.98 / 115VAC at full load
Input Current 4A/ 115VAC 2A/ 230VAC
Inrush Current 120A/ 230VAC
Leakage Current 1.5mA/ 240VAC
Battery Type Open & sealed lead acid
LED Indicator Charging(CC) : RED Floating charging(CV) : GREEN
Over Load Protection 90 ~ 110% rated output power
Constant current limiting recovers automatically after fault condition is removed
Short Circuit Protection Hiccup mode, recovers automatically after fault condition is removed
Over Voltage Protection 105 ~ 135% rated output voltage
Shut down o/p voltage, re-power on to recover
Over Temperature Protection 95°C ±5°C (TSW1) detect on heatsink of power transistor
Shut down o/p voltage, recovers automatically after temperature goes down
Working Temperature -10°C ~ +60°C (Refer to output load derating curve)
Working Humidity 20% ~ 90% RH non-condensing
Storage Temperature, Humidity -20°C ~ +85°C, 10 ~ 95% RH
Temperature Coefficient ±0.03% /°C (0~50°C)
Vibration 10 ~ 500Hz, 2G 10min./1cycle, period for 60min. each along X, Y, Z axes
Withstand Voltage I/P-O/P: 3KVAC
Isolation Resistance I/P-O/P: 100M Ohms / 500VDC / 25°C/ 70% RH
Safety Standards UL1012, EN60950-1 approved
EMC Compliance to EN55022 Class B, FCC PART 15 Class B/ CISPR22 class B,
EN61000-3-2,3; EN61000-4-2,3,4,5,6,8,11, light industry level, criteria A
MTBF 190Khrs min. MIL-HDBK-217F(25°C)
Dimension 210 x 85 x 46mm
DC Plug 4 Pin Din (R7B); Other types available, subject to MOQ
DC Cable UL1185 16AWG 4C 1000±50mm; Other types available, subject to MOQ
  • CB
  • CCC-
  • CE
  • CNS
  • PFC