MEAN WELL Products
Description
An intelligent 1000W AC/DC battery charger for lead acid batteries with selectable 2 stage/8 stage charging characteristics. Up top 2 battery banks can be connected to PB-1000 at the same time. Features include built in temperature compensation circuit, PFC function, remote ON/OFF control, fan ON/OFF control, reverse polarity, short circuit, over-voltage, and over temperature protections.
Additional information
| Standards | CB, CE, CSUUS, PFC, TUV |
|---|---|
| Type | AC/DC |
| Outputs | Single |
- Charger for lead-acid batteries (flooded, Gel and AGM) and li-ion batteries (lithium iron and lithium manganese)
- 2/3/8 stage charging selectable on output panel
- Universal AC input / full range
- Built-in battery rescue function
- Built in active PFC function PF>0.95
- Controlled by microprocessor
- Protections: Short circuit / Reverse Polarity / Over voltage / Over temperature
- Built in remote ON / OFF control
- 2-bank charger
- Temperature compensation function
- Fan ON / OFF control (depends on charging current)
- 3 colour LED loading indicator
- 3 years warranty
- Home appliances
- Solar power system
- Security system
- UPS system
- Electrical wheelchair
- Leisure vehicle
| Input Voltage | 90 ~ 264Vac 127 ~ 370Vdc |
| Input Frequency | 47 ~ 63Hz |
| Power Factor | 0.95/230Vac 0.98/115Vac at full load |
| Input Current | 12A/115Vac 5.2A/230Vac |
| Inrush Current | 25A/115Vac 50A/230Vac |
| Leakage Current | <3.5mA/ 240Vac |
| Battery Type | Open & Sealed Lead Acid |
| Reverse Current | <1mA |
| Over Voltage Protection | Shut down o/p voltage, re-power on to recover |
| Over Temperature Protection | Shut down o/p voltage, recovers automatically after temperature goes down |
| Short Circuit Protection | Protected by internal circuit |
| Reverse Polarity | Protected by internal circuit |
| Remote Control | Open: Normal work Short: Stop Charging |
| Battery Banks | 2 banks (A & B) |
| Fast Charge | 2 / 8 stage select |
| Charging OK | Relay contact rating (max.): 30V/1 Aresistive; |
| Short: when the unit is working properly, Open: when the unit stop charging | |
| Output OK | Relay contact rating (max.): 30V/1Aresistive; |
| Short: when the battery is full, Open: when the battery is still charging | |
| Temperature Compensation | By NTC, compensate both banks at the same time |
| Working Temperature | -20°C ~ +60°C (Refer to output load derating curve) |
| Working Humidity | 20 ~ 90% RH non-condensing |
| Storage Temperature, Humidity | -40°C ~ +85°C, 10 ~ 95% RH |
| Temperature Coefficient | ±0.05%/°C (0 ~ 50°C) |
| Vibration | 10 ~ 500Hz, 2G 10min./1cycle, 60min. each along X, Y, Z axes |
| Withstand Voltage | I/P-O/P:3KVAC I/P-FG:1.5KVAC O/P-FG:0.5KVAC |
| Isolation Resistance | I/P-O/P, I/P-FG, O/P-FG:100M Ohms/500VDC 25°C 70%RH |
| Safety Standards | UL60950-1, TUV EN60950-1 approved |
| EMC | Compliance to EN55022 (CISPR22); EN61000-3-2,-3; ENV50204; |
| EN61000-4-2,3,4,5,6,8,11; EN55024, light industry level, criteria A | |
| MTBF | 127.4Khrs min. MIL-HDBK-217F (25°C) |
- CB
- CE
- CSUUS
- PFC
- TUV
