MEAN WELL Products

HomeMEAN WELL ProductsExternal Battery Charger300W PFC Single Output Battery Charger

PB-300P-12 - 300W PFC Single Output Battery Charger

Email

Description

Designed for lead acid batteries featuring 3 stage charging characteristics and the automated derating capability for charging current under high ambient temperatures, these intelligent chargers will quickly and efficiently feed your hungry batteries and ensure the lifetime of them at the same time. With the passive PFC function PB-300 can comply with the harmonic requirements of EN61000-3-2 & equiped with an IEC320 C14 AC Inlet and ON/OFF switch this unit is very convenient for both household and general consumer use. The 48.5mm low profile design also solves a lot of installation troubles and space issues.

Additional information

Standards

CB, CE

Ah

200Ah Maximum

Battery type

Lead Acid

  • 3 stage charging
  • AC 115/230VAC selected by switch
  • Built-in passive PFC function compliance to EN61000-3-2 Class A (option)
  • Reverse Polarity/Short circuit/Over voltage/Over temperature Protection
  • Cooling by free air convection
  • Charger for lead-acid batteries
  • 2 color LED loading indicator
  • Low cost, High reliability
  • Household appliances
  • Leisure vehicles such as caravans & RV's
  • Marine applications
Input Voltage90 to 132VAC / 180 to 264VAC selected by switch
Input Frequency47 to 63Hz
Power Factor>0.65 typically at 230VAC
AC Current6A/115VAC 3A/230VAC
Inrush Current60A cold start
Leakage Current<3.5mA / 240VAC
Battery TypeOpen & Sealed Lead Acid
Over Load Protection90 to 110% rated output current
Constant current limiting, recovers automatically after fault condition is removed
Reverse Polarity PortectionBy internal fuse
Over Temperature ProtectionAutomatically derate charge current until zero
Working Temperature-10°C to +40°C (Refer to output load derating curve)
Working Humidity20% to 90% RH non-condensing
Storage Temperature, Humidity-40°C to +85°C, 10% to 95% RH
Temperature Coefficient±0.05%/°C (0°C to 45°C)
Vibration10 to 500Hz, 2G 10min./1cycle, 60min. each along X, Y, Z axes
Safety StandardsEN60335-2-29 CB Approved by TUV
Withstand VoltageI/P-O/P:3KVAC I/P-FG:1.5KVAC O/P-FG:0.5KVAC
Isolation ResistanceI/P-O/P, I/P-FG, O/P-FG:100M Ohms/500VDC
EMCCompliance to EN55022 (CISPR22) Class B, EN61000-3-2,-3
EN61000-4-2,3,4,5,6,8,11; ENV50204, EN55024, Light industry level, criteria A
MTBF115.8Khrs minimum. MIL-HDBK-217F (25°C)
  • CB
  • CE