MEAN WELL Products
PS-120 P Series - 120W Single Output Open Frame Power Supply
Additional information
| Standards | CB, CE, CUL, PFC, TRIGS |
|---|---|
| Type | AC/DC |
| Outputs | Single |
- AC input range selected by switch
- Built-in passive PFC option
- AC ON-OFF switch
- 3 pole AC inlet with fuse holder
- Short circuit, over load, over voltage, over temperature protections
- 2 colour LED loading indicator
- Cased option available
| Input Voltage | 88 ~ 132Vac / 176 ~ 264Vac selected by switch |
| Input Frequency | 47~63Hz |
| Power Factor | >0.65 (with PFC series) |
| Input Current | 3A/115Vac 1.5A/230Vac |
| Inrush Current | 30A/115Vac 60A/230Vac, cold start |
| Leakage Current | <1.5mA / 240Vac |
| Set Up, Rise Time | 1000ms, 50ms at full load |
| Hold Time | 16ms at full load |
| Over Load Protection | 105 ~ 150% rated output power. Protection type : Hiccup mode, recovers automatically after fault co |
| Hiccup mode, recovers automatically after fault condition is removed | |
| Over Voltage Protection | Hiccup mode, recovers automatically after fault condition is removed |
| Over Temperature Protection | RTH2 >70°C ±10°C Detect on RTH2 thermistor |
| Hiccup mode, recovers automatically after fault condition is removed | |
| Working Temperature | -10°C to +60°C (Refer to output load derating curve) |
| Working Humidity | 20 ~ 90% RH non-condensing |
| Storage Temperature., Humidity | -20°C to +85°C , 10 ~ 95% RH |
| Temperature Coefficient | ±0.05%/°C (0 ~ 45°C) |
| Vibration | 10 ~ 500Hz, 2G 10min./1cycle, 60min. each along X, Y, Z axes |
| Withstand Voltage | I/P-O/P:3KVAC I/P-FG:1.5KVAC O/P-FG:0.5KVAC |
| Isolation Resistance | I/P-O/P, I/P-FG, O/P-FG:100M Ohms/500VDC |
| Safety Standards | UL60950-1, TUV E60950-1, EN60335, EN60335-1, EN60335-2-29 Approved |
| EMC | Compliance to EN55022 (CISPR22) Class B, EN61000-3-2,-3, |
| EN61000-4-2,3,4,5,6,8,11; ENV50204, EN55024, Light industry level, criteria A | |
| MTBF | 249.5K hrs min. MIL-HDBK-217F (25?C ) |
- CB
- CE
- CUL
- PFC
- TRIGS
