Meanwell Direct UK - Authorised distributor of Meanwell Power Supplies, PSU and Power ChargersMeanwell Direct UK - Authorised distributor of Meanwell Power Supplies, PSU and Power Chargers
Meanwell Direct UK - Authorised distributor of Meanwell Power Supplies, PSU and Power Chargers

Product Search


Advanced Search

Featured Product

Request Information

Clipbook

You haven't added any products to your clip book yet.

Standards

We make every effort to ensure the information provided is accurate however we can not be held responsible for errors. Specifications are subject to change without notice; please ensure you conduct testing to ensure the product is suitable for your intended application.

New Products

300W PFC Single Output Battery Charger

300W PFC Single Output Battery Charger Designed for lead acid batteries featuring 3 stage charging characteristics and the automated...
All New Products

In Development

200W Single Output IP65/67 Switching Power Supply

200W Single Output IP65/67 Switching Power Supply
All Products in Development

MPS-200 Series - 200W Single Output Medical Open Frame Power Supply

Home > Products > 200W Single Output Medical Open Frame Power Supply

Features

  • Universal AC input / Full range
  • Built-in active PFC, PF>0.95@230VAC
  • Low leakage current <180µA
  • Free air convection for 140W and forced air convection for 200W
  • Power good and fail signal output
  • Built-in remote ON-OFF control & remote sense function
  • Fixed switching frequency at 100KHz
  • Compliance to UL2601-1 & TUV EN60601-1 medical standards

Applications

  • Non-patient contact medical
  • 1U
  • General electronics
  • Low Profile IT

Description

MPS-200 Series are 200W PCB type switching power supplies with active PFC function. Complying with both medical and industrial agency standards these units can deliver their full rated output of 200W with 25CFM forced are or 140W with convection cooling for either medical or industrial applications. Featuring only 180uA of leakage current at 264VAC, they can be equipped into non-patient contact medical equipment and still comply with Class B EMI regulations. Standard functions include short circuit, over load, over voltage and over temperature protections, PG/PF signal output, remote sense and remote ON/OFF control that cover most of the demands for typicall usages. Since the height is only 35.5mm the MPS-200 series are also suitable for 1U applications or other height constraint applications.

Standards

TUVMedicalMEDICALPFCCBCSUUSCE
Product Image - MPS-200 Series - 200W Single Output Medical Open Frame Power Supply

Specification

Input Voltage 90~264 VAC, 47~440Hz / 127~370VDC.
Power Factor PF>0.95/230VAC PF>0.98/115VAC, full load
AC Input Current 3.5A at 115VAC, 60Hz or 1.6A at 230VAC, 60Hz full load.
Inrush Current <25A at 115VAC or <40A at 230VAC Cold start
Setup, Rise Time 1000ms, 20ms / 230VAC at full load , 3000ms, 20ms / 115VAC at full load
Hold-Up Time 16ms / 230VAC at full load, 16ms / 115VAC at full load
Leakage Current <180µA at 264VAC for earth leakage
<100µA at 264VAC for patient leakage
DC Output ADJ Range -5% to +10% rated output, on first output
Over Load Protection 120~160% rated load
Auto recovery once fault condition removed
Over Voltage Protection 115%~135% rated load, on first output
Over Temperature Protection At 95°C. Will shut down and recover automatically after temperature goes down.
Power Good/Fail Signal TTL logic high for power good and TTL low for power fail.
Remote Control RC+/RC-:0 ~ 0.8V=power on; 4 ~ 10V=power off sink current<4~10mA
Working Temperature -20°C to 70°C (refer to derating curve)
Working Humidity 20~90% RH non-condensing.
Storage Temp , Humidity -40°C to +85°C, 10~90% RH
Temperature Coefficient ±0.04%/°C (0~50°C) full load
Vibration 2G 10Hz ~500Hz 10 min cycle.
Medical Safety Standards UL60601-1, TUV EN60601-1 approved
Commercial Safety Standards Complies with UL60950-1, TUV EN60950-1
Withstand Voltage I/P-O/P: 4000VAC I/P-FG, O/P-FG: 1500VAC
Isolation Resistance I/P-O/P, I/P-FG, O/P-FG : >100M Ohms
EMI Compliance to EN55011 Class B, EN55022 Class B, EN61000-3-2, EN61000-3-3
EMS Compliance to EN61000-4-2 Level 3, 8KV, EN61000-4-2 Level 2, 4KV
EN61000-4-3 Level 2, 3V/m , EN61000-4-3 Level 3, 10V/m,
EN61000-4-4 Level 2, 1KV/5KHz, EN61000-4-4 Level 3, 2KV/5KHz
EN61000-4-5 Level 4, 2KV/Line-Line, 4KV/Line-Earth,
EN61000-4-6 Level 2, 3Vrms/m, Level 3, 10Vrms/m
EN61000-4-8 Level 2, 3A/m, EN61000-4-8 Level 3, 10A/m, EN61000-4-11 Compliance
ENV50204 Level 2, 3V/m, 900MHz, ENV50204 Level 3, 10A/m, 900MHz
MTBF 262,100 hours min MIL-HDBK-217F

Items

MPS-200 Series Output Data

Part Code Voltage Rated current Minimum Load Current Convection Current with Fan 25CFM Peak Load with 25CFM Fan R&N Tol. Line Reg. Load Reg. Eff.
MPS-200-3-3 3.3V 40A 0A 28A 40A 48A 80mV ±2.0% ±0.5% ±1.0% 77%
MPS-200-5 5V 40A 0A 28A 40A 48A 80mV ±2.0% ±0.5% ±1.0% 81%
MPS-200-12 12V 16.7A 0A 11.7A 16.7A 20A 100mV ±2.0% ±0.5% ±1.0% 84%
MPS-200-15 15V 13.4A 0A 9.4A 13.4A 16A 100mV ±2.0% ±0.5% ±1.0% 85%
MPS-200-24 24V 8.4A 0A 5.9A 8.4A 10A 150mV ±1.0% ±0.5% ±1.0% 86%
MPS-200-48 48V 4.2A 0A 3A 4.2A 5A 200mV ±1.0% ±0.5% ±1.0% 87%
Download PDF document  (514KB)

 

© Copyright 2008  Mean Well Direct - Meanwell Power Supplies

Meanwell Direct is an authorised UK distributor of Meanwell Power Supplies, PSU and Power Chargers one of the largest switching power supply manufacturers in the world.Meanwell Direct specialise in Meanwell power supplies and can offer a broad range of power supplies for a range of applications including medical, communications and control panel power supplies.Meanwell Direct can also provide cusatomised power supplies; designed to meet your specifications and requirements.

With our highly experienced professionals, Meanwell Direct offer a first class friendly service from point of contact through to completion of purchase and after sales service.