MEAN WELL Products
Description
HRPG-150 Series are 150W AC/DC miniature enclosed type power supplies with PFC function that fulfill the requirement of EN61000-3-2 for harmonic current with remote ON/OFF control and 5V/0.3A standby output to achieve no load power consumption <0.5W. Other standard functions of HRPG-150 include 300VAC input surge immunity for 5 seconds, remote sense, LED indicator, heavy industry level of EMS immunity(EN61000-6-2), and protection for short-circuit, overload (constant current limiting), over voltage, and over temperature.
Additional information
| Standards | CB, CE, CSUUS, PFC, TUV |
|---|---|
| Type | AC/DC |
| Outputs | Single |
- Universal AC input
- Built-in active PFC function, PF>0.95
- High efficiency up to 88% (typ.)
- Short circuit, over load, over voltage, over temperature protections
- Withstand 300VAC surge input for 5 seconds
- Cooling by free air convection
- Built-in constant current limiting circuit
- 1U low profile 38mm
- Built-in ON-OFF control
- Built-in remote sense function
- Stand by 5V@0.3A
- No load power consumption <0.5A
- General electronics
- Factory automation
- Moving signs
- Test and measurement equipment
| Input Voltage | 85 ~ 264Vac 120 ~ 370Vdc |
| Input Frequency | 47 ~ 63Hz |
| Power Factor | PF>0.95/230Vac PF>0.99/115Vac at full load |
| Input Current | 2.3A/115Vac 1.3A/230Vac |
| Inrush Current | 35A/115Vac 65A/230Vac |
| Leakage Current | <1mA/ 240Vac |
| Set Up, Rise Time | 1000ms, 50ms/230Vac 2500ms, 50ms/115Vac at full load |
| Hold Up Time | 16ms/230Vac 16ms/115Vac at full load |
| Over Load Protection | 105 ~ 135% rated output power |
| Constant current limiting, recovers automatically after fault condition is removed | |
| Over Voltage Protection | Shut down o/p voltage, re-power on to recover |
| Over Temperature Protection | 95°C (3.3V ~ 7.5V), 85°C (12V ~ 48V) (TSW1 : detect on heatsink Q1 of power transistor) |
| 105°C (3.3V ~ 7.5V),100°C (12V ~ 48V) (TSW2 : detect on heatsink HS4 of power transistor) | |
| Shut down O/P voltage, recovers automatically after temperature goes down | |
| Remote Control | Short power OFF ; Open power ON |
| Working Temperature | -30°C ~ +70°C (Refer to output load derating curve) |
| Working Humidity | 20 ~ 90% RH non-condensing |
| Storage Temperaure, Humidity | -40°C ~ +85°C, 10 ~ 95% RH |
| Temperature Coefficient | ±0.04%/°C (0 ~ 50°C) |
| Vibration | 10 ~ 500Hz, 5G 10min./1cycle, 60min. each along X, Y, Z axes |
| Withstand Voltage | I/P-O/P:3KVAC I/P-FG:1.5KVAC O/P-FG:0.5KVAC |
| Isolation Resistance | I/P-O/P, I/P-FG, O/P-FG:100M Ohms / 500VDC/ 25/°C 70% RH |
| Safety Standards | UL60950-1, TUV EN60950-1 approved |
| EMC | Compliance to EN55022 (CISPR22) Class B; EN61000-3-2,-3; ENV50204; |
| EN61000-4-2,3,4,5,6,8,11; EN55024; EN61000-6-2, heavy industry level, criteria A | |
| MTBF | 213.4K hrs min. MIL-HDBK-217F (25°C) |
| Dimensions | 159 x 97 x 38mm |
- CB
- CE
- CSUUS
- PFC
- TUV
