SKE10 Series - 10W DC-DC Regulated Single Output Converter
Home > Products > DC-DC Converter > 10W DC-DC Regulated Single Output Converter
Features
- 2:1 wide input range
- 4:1 wide input range (optional)
- 1000VDC I/O isolation
- Input Pi network filter
- Protections:Short circuit/Over load
- Free air convection
- Six-sided shield metal case
- High reliabilty/low cost
- 100% burn-in test
Specification
| DC current |
Full load. A: 1100mA, B:530mA, C:270mA |
|
No load. A: 28mA, B:16mA, C: 8mA |
| Filter |
Pi network |
| Line regulation |
±0.3% |
| Load regulation |
±0.5% |
| Voltage accuracy |
±2% |
| Switching frequency |
200Khz min. |
| Over load protection |
160% ~ 250% rated output power |
|
Protection type: Hiccup mode, recovers automatically after fault condition is removed |
| Short circuit portection |
All output equipped with short circuit |
|
Protection type: Hiccup mode, recovers automatically after fault condition is removed |
| Working temp. |
-25~+71°C (refer to output load derating curve) |
| Working humidity |
20% ~ 90% RH non-condensing |
| Storage temp., humidity |
-25~+105°C, 10 ~ 95% RH |
| Temp. coefficient |
±0.03% /°C (0~50°C) |
| Vibration |
10 ~ 500Hz, 2G 10 min. /1cycle, period for 60 min. each along X, Y, Z axes |
| MTBF |
500khrs min. MIL-HDBK-217F (25°C) |
| Withstand voltage |
I/P-O/P:1KVDC |
| Isolation resistance |
I/P-O/P: 100M Ohms / 500VDC |
SKE10 Series Specifications
.jpg)
