MEAN WELL Products
Description
10W DC/DC converters low wattage range, for the emerging trend of distributed power applications, featuring 4:1 wide DC input range and 1500VDC input/output isolation, NSD10 series has two kinds of DC input level – 12V, 48V, and eight kinds of DC output levels accross the series’. Standard functions include remote ON/OFF control, short circuit, over load, and over voltage protections. These economical gadgets are suitable for applications using distributed power architecture that transfer the high DC bus voltage to lower DC working voltage at the location of the load.
Additional information
| Standards | CE |
|---|---|
| Type | DC/DC |
| Outputs | Dual |
- Wide 4:1 DC input range
- Short circuit, over load, over voltage protections
- 1500VDC I/O isolation
- Built-in EMI filter
- Cooling by free air convection
- Built-in remote ON-OFF control
- 100% full load burn-in test
- High reliability
| Ripple & Noise | 75mV (10%~100% load) |
| Rated Power | 10W |
| Line Regulation | ±1.0% |
| Shutdown Idle Current | 20mA / 12Vdc |
| Over Load Protection | Above 105% rated output power |
| Over power limiting, recovers automatically after fault condition is removed | |
| Short Circuit Protection | Recovers automatically after fault condition is removed |
| On/Off Control | Logic 1 OPEN: ON Logic 0 GND: OFF |
| Working Temperature | -25°C to +70°C |
| Working Humidity | 0% ~ 95% RH Max |
| Storage Temperature, Humidity | -40°C to +85°C, 0~95%RH |
| Temperature Coefficient | ±0.03%/°C (0~60°C) |
| Isolation Voltage | I/P-O/P: 1.5KVDC |
| Isolation Resistance | I/P-O/P: 100M Ohms/500VDC 25°C 70% RH |
| Safety Standards | Design refers to UL60950-1,TUV EN60950-1 |
| EMC | Compliance to EN55022 (CISPR22) Class B, EN61000-4-2,3,4,6,8; |
| EN55024, Light industry level, criteria A | |
| MTBF | 1878.5K hrs min. MIL-HDBK-217F (25°C) |
- CE
