MEAN WELL Products
Description
GS90 Series is a AC/DC single output Class I green adaptor with IEC320 C14 AC inlet, full range input and built-in active PFC. This new gneration of adaptor complies with the latest Energy Star regulation and EISA 2007. With <0.5W no load power consumption and up to 89% of high efficiency the series is energy saving st both stand-by and active mode.
Additional information
| Standards | CB, CCC-, CE, CNS, CUL, PFC, TRIGS |
|---|---|
| Type | AC/DC |
| Outputs | Single |
| Technology | Switchmode |
- Universal AC input / Full range
- Built-in active PFC function, PF>0.91
- No load power consumption <0.5W
- Energy star(CEC) level IV compliant
- Meet energy star (CEC) draft V2.0 level V
- Meet EISA 2007(Energy Independence and Security Act)
- 3 pole AC inlet IEC320-C14
- Class I power (with earth pin)
- Short circuit, over load, over voltage, over temperature protections
- Pass LPS
- Fully enclosed plastic case
- LED indicator for power on
- Approvals: UL / CUL / TUV / BSMI / CCC / CB / FCC / CE
- Consumer electronics
- Communication industry
- Office/commercial equipment
- Industrial devices
| Input Voltage | 90 ~ 264Vac 135 ~ 370Vdc |
| Input Frequency | 47 ~ 63Hz |
| Power Factor | PF>0.91 / 230Vac PF>0.95 / 115Vac at full load |
| Input Current | 2A/ 115Vac 1A/ 230Vac |
| Inrush Current | 70A/ 230Vac |
| Leakage Current | 1mA/ 240Vac |
| Set Up, Rise Time | 1000ms, 20ms / 230Vac 1000ms, 20ms / 115Vac at full load |
| Hold Up Time | 20ms / 230Vac 20ms / 115Vac at full load |
| Over Load Protection | 110 ~ 150% rated output power |
| Hiccup mode, recovers automatically after fault condition is removed | |
| Over Voltage Protection | 105 ~ 135% rated output voltage |
| Shut down o/p voltage, re-power on to recover | |
| Over Temperature Protection | RTH30 > 100°C |
| Shut down o/p voltage, re-power on to recover | |
| Working Temperature | 0°C ~ +50°C (Refer to output load derating curve) |
| Working Humidity | 20% ~ 90% RH non-condensing |
| Storage Temperature, Humidity | -20°C ~ +85°C, 10 ~ 95% RH |
| Temperature Coefficient | ±0.03% /°C (0~50°C) |
| Vibration | 10 ~ 500Hz, 2G 10min./1cycle, period for 60min. each along X, Y, Z axes |
| Withstand Voltage | I/P-O/P: 3KVAC I/P-FG:1.5KVAC O/P-FG:0.5KVAC |
| Isolation Resistance | I/P-O/P, I/P-FG, O/P-FG:100M Ohms / 500VDC / 25/°C 70% RH |
| Safety Standards | UL60950-1, TUV EN60950-1, BSMI CNS14336, CCC GB4943 approved |
| EMC | Compliance to EN55022 Class B, FCC PART15 / CISPR22 Class B, CNS13438 Class B, GB9254 Class B; |
| EN61000-3-2,3, GB17625.1; EN61000-4-2,3,4,5,6,8,11, light industry level, criteria A | |
| MTBF | 348.7Khrs min. MIL-HDBK-217F (25°C) |
| DC Plug | PM1: 2.5 x 5.5 x 11mm, tuning fork type, center positive. Other types available by customer request. |
| DC Cable | UL1185 14AWG 1000 ±50mm for 12V ~ 15V |
| UL1185 16AWG 1200 ±50mm for 19 ~ 48V |
- CB
- CCC-
- CE
- CNS
- CUL
- PFC
- TRIGS
Products in this range
| Part number | Power (watts) | Voltage (max/rated) | Current (amps) | R&N (mV) | Efficiency (%) | |
|---|---|---|---|---|---|---|
| GS90A12-P1M | 80W | 12V | 7A | 80mV | 88% | Request Quote |
| GS90A15-P1M | 90W | 15V | 6A | 100mV | 89% | Request Quote |
| GS90A19-P1M | 90W | 19V | 5A | 150mV | 89% | Request Quote |
| GS90A24-P1M | 90W | 24V | 4A | 180mV | 90% | Request Quote |
| GS90A48-P1M | 90W | 48V | 2A | 240mV | 91% | Request Quote |
