PLC-30 Series - 30W AC/DC Single Output Class 2 LED Lighting Power Supply
Home > Products > 30W AC/DC Single Output Class 2 LED Lighting Power Supply
Features- Universal AC input / Full range
- Fully isolated plastic case with terminal block style I/O
- Built-in constant current limiting circuit
- Adjustable output voltage and current level
- Short circuit, over load, over voltage, over temperature protections
- Built-in active PFC function, comply with EN61000-3-2 class C (Pin>25W)
- Cooling by free air convection
- 100% full load burn-in test
- High reliability
- Suitable for LED lighting and moving sign applications
- Compliance to worldwide safety regulations for lighting
Applications- Moving signs
- Backlighting
- LED-based decorative/architectural lighting
- LED stage and theater lighting
- LED electronic displays
DescriptionPLC-30 Series are 30W LED Lighting Power Supplies based on earlier PLN models but with a redesign to change the terminal block style of the Input/Output connections to be more flexible when wiring and the addition of two access points, with rubber stoppers, to allow the output voltage and current to be adjusted without the need to remove the covers.
|
Standards
  
|
|
Specification
| Input Voltage |
90 ~ 264VAC 127 ~ 370VDC |
| Input Frequency |
47 ~ 63Hz |
| Power Factor |
PF>0.9 at 75 ~ 100% load, 115VAC / 230VAC |
| Input Current |
0.4A/115VAC 0.2A/230VAC |
| Inrush Current |
40A/230VAC |
| Leakage Current |
<0.5mA / 240VAC |
| Voltage Tolerance |
±10% |
| Line Regulation |
±3.0% |
| Load Regulation |
±5.0% |
| Set Up Time |
1500ms / 230VAC 300ms / 115VAC at full load |
| Over Current Protection |
100 ~ 110% |
|
Constant current limiting, recovers automatically after fault condition is removed |
| Short Circuit Protection |
Hiccup mode, recovers automatically after fault condition is removed. |
| Over Voltage Protection |
Shut down o/p voltage, re-power on to recover |
| Over Temperature Protection |
95°C ±10°C (TSW1) |
|
Shut down o/p voltage, re-power on to recover |
| Working Temperature |
-30°C ~ +50°C (Refer to output load derating curve) |
| Working Humidity |
20 ~ 95% RH non-condensing |
| Storage Temperature, Humidity |
-40°C ~ +80°C, 10 ~ 95% RH |
| Temperature Coefficient |
±0.06%/°C (0 ~ 50°C) |
| Vibration |
10 ~ 500Hz, 2G 12min./1cycle, period for 72min. each along X, Y, Z axes |
| Withstand Voltage |
I/P-O/P:3.75KVAC |
| Isolation Resistance |
I/P-O/P:100M Ohms / 500VDC / 25°C/ 70% RH |
| Safety Standards |
TUV EN61347-1, EN61347-2-13 approved |
| EMC |
Compliance to EN55015; EN61000-3-2 Class C (Pin>25W), Class D (>70% load) ; EN61000-3-3; |
|
EN61000-4-2,3,4,5,6,8,11; ENV50204, EN55024, EN61547, light industry level, criteria A |
| MTBF |
625.5Khrs min. MIL-HDBK-217F (25°C) |
| Dimensions |
160 x 46 x 30mm |
|
Items
PLC-30 Series Specifications
|
Part No
|
Voltage
|
Constant Current Region
|
Rated Current
|
Current Range
|
Rated Pwr
|
R&N
|
Volt. Adj.
|
Current Adj.
|
Eff.
|
OVP
|
|
PLC-30-9
|
9V
|
6.3 ~ 9V
|
3.3A
|
0 ~ 3.3A
|
29.7W
|
2.6V
|
8.55 ~ 9.9V
|
2.475 ~ 3.399A
|
80%
|
10 ~ 14V
|
|
PLC-30-12
|
12V
|
8.4 ~ 12V
|
2.5A
|
0 ~ 2.5A
|
30W
|
2V
|
11.4 ~ 13.2V
|
1.875 ~ 2.575A
|
82.5%
|
14 ~ 16V
|
|
PLC-30-15
|
15V
|
10.5 ~ 15V
|
2A
|
0 ~ 2A
|
30W
|
2.6V
|
14.5 ~ 16.5V
|
1.5 ~ 2.06A
|
83.5%
|
17 ~ 22V
|
|
PLC-30-20
|
20V
|
14 ~ 20V
|
1.5A
|
0 ~ 1.5A
|
30W
|
2.6V
|
19 ~ 22V
|
1.125 ~ 1.545A
|
84%
|
23 ~ 26V
|
|
PLC-30-24
|
24V
|
16.8 ~ 24V
|
1.25A
|
0 ~ 1.25A
|
30W
|
2.4V
|
22.8 ~ 26.4V
|
0.938 ~ 1.288A
|
84%
|
27 ~ 34V
|
|
PLC-30-27
|
27V
|
18.9 ~ 27V
|
1.12A
|
0 ~ 1.12A
|
30.24W
|
2.3V
|
25.65 ~ 29.7V
|
0.84 ~ 1.1536A
|
84.5%
|
31 ~ 35V
|
|
PLC-30-36
|
36V
|
25.2 ~ 36V
|
0.84A
|
0 ~ 0.84A
|
30.24W
|
3.6V
|
34.2 ~ 39.6V
|
0.63 ~ 0.865A
|
85%
|
40 ~ 50V
|
|
PLC-30-48
|
48V
|
33.6 ~ 48V
|
0.63A
|
0 ~ 0.63A
|
30.24W
|
3.7V
|
45.6 ~ 52.8V
|
0.473 ~ 0.649A
|
85.5%
|
53 ~ 63V
|
|
 (424KB)
|
